1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
|
// Copyright 2021 Paul Cotter (@gr1mr3aver)
// Copyright 2023 Nick Brassel (@tzarc)
// SPDX-License-Identifier: GPL-2.0-or-later
#include "qp_internal.h"
#include "qp_comms.h"
#include "qp_gc9a01.h"
#include "qp_gc9xxx_opcodes.h"
#include "qp_gc9a01_opcodes.h"
#include "qp_tft_panel.h"
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Driver storage
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
tft_panel_dc_reset_painter_device_t gc9a01_drivers[GC9A01_NUM_DEVICES] = {0};
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Initialization
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
__attribute__((weak)) bool qp_gc9a01_init(painter_device_t device, painter_rotation_t rotation) {
// A lot of these "unknown" opcodes are sourced from other OSS projects and are seemingly required for this display to function.
// clang-format off
const uint8_t gc9a01_init_sequence[] = {
// Command, Delay, N, Data[N]
GC9XXX_SET_INTER_REG_ENABLE1, 0, 0,
GC9XXX_SET_INTER_REG_ENABLE2, 0, 0,
0x84, 0, 1, 0x40,
GC9A01_SET_FUNCTION_CTL, 0, 3, 0x00, GC9A01_SOURCE_OUTPUT_SCAN_DIRECTION_S360_TO_S1 | GC9A01_GATE_OUTPUT_SCAN_DIRECTION_G1_TO_G32, GC9A01_LCD_DRIVE_LINE_240, // Only works if the previous command is present (undocumented)
GC9A01_SET_POWER_CTL_2, 0, 1, 0x20,
GC9A01_SET_POWER_CTL_3, 0, 1, 0x20,
GC9A01_SET_POWER_CTL_4, 0, 1, 0x22,
GC9XXX_SET_GAMMA1, 0, 6, 0x45, 0x09, 0x08, 0x08, 0x26, 0x2A,
GC9XXX_SET_GAMMA2, 0, 6, 0x43, 0x70, 0x72, 0x36, 0x37, 0x6F,
GC9A01_SET_GAMMA3, 0, 6, 0x45, 0x09, 0x08, 0x08, 0x26, 0x2A,
GC9A01_SET_GAMMA4, 0, 6, 0x43, 0x70, 0x72, 0x36, 0x37, 0x6F,
0x66, 0, 10, 0x3C, 0x00, 0xCD, 0x67, 0x45, 0x45, 0x10, 0x00, 0x00, 0x00,
0x67, 0, 10, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x01, 0x54, 0x10, 0x32, 0x98,
GC9XXX_CMD_TEARING_ON, 0, 0,
GC9XXX_SET_PIXEL_FORMAT, 0, 1, GC9A01_PIXEL_FORMAT_16_BPP_DBI,
GC9XXX_CMD_INVERT_ON, 0, 0,
GC9XXX_CMD_SLEEP_OFF, 120, 0,
GC9XXX_CMD_DISPLAY_ON, 20, 0
};
// clang-format on
qp_comms_bulk_command_sequence(device, gc9a01_init_sequence, sizeof(gc9a01_init_sequence));
// Configure the rotation (i.e. the ordering and direction of memory writes in GRAM)
const uint8_t madctl[] = {
[QP_ROTATION_0] = GC9XXX_MADCTL_BGR,
[QP_ROTATION_90] = GC9XXX_MADCTL_BGR | GC9XXX_MADCTL_MX | GC9XXX_MADCTL_MV,
[QP_ROTATION_180] = GC9XXX_MADCTL_BGR | GC9XXX_MADCTL_MX | GC9XXX_MADCTL_MY,
[QP_ROTATION_270] = GC9XXX_MADCTL_BGR | GC9XXX_MADCTL_MV | GC9XXX_MADCTL_MY,
};
qp_comms_command_databyte(device, GC9XXX_SET_MEM_ACS_CTL, madctl[rotation]);
return true;
}
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
// Driver vtable
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
const tft_panel_dc_reset_painter_driver_vtable_t gc9a01_driver_vtable = {
.base =
{
.init = qp_gc9a01_init,
.power = qp_tft_panel_power,
.clear = qp_tft_panel_clear,
.flush = qp_tft_panel_flush,
.pixdata = qp_tft_panel_pixdata,
.viewport = qp_tft_panel_viewport,
.palette_convert = qp_tft_panel_palette_convert_rgb565_swapped,
.append_pixels = qp_tft_panel_append_pixels_rgb565,
.append_pixdata = qp_tft_panel_append_pixdata,
},
.num_window_bytes = 2,
.swap_window_coords = false,
.opcodes =
{
.display_on = GC9XXX_CMD_DISPLAY_ON,
.display_off = GC9XXX_CMD_DISPLAY_OFF,
.set_column_address = GC9XXX_SET_COL_ADDR,
.set_row_address = GC9XXX_SET_ROW_ADDR,
.enable_writes = GC9XXX_SET_MEM,
},
};
#ifdef QUANTUM_PAINTER_GC9A01_SPI_ENABLE
// Factory function for creating a handle to the ILI9341 device
painter_device_t qp_gc9a01_make_spi_device(uint16_t panel_width, uint16_t panel_height, pin_t chip_select_pin, pin_t dc_pin, pin_t reset_pin, uint16_t spi_divisor, int spi_mode) {
for (uint32_t i = 0; i < GC9A01_NUM_DEVICES; ++i) {
tft_panel_dc_reset_painter_device_t *driver = &gc9a01_drivers[i];
if (!driver->base.driver_vtable) {
driver->base.driver_vtable = (const painter_driver_vtable_t *)&gc9a01_driver_vtable;
driver->base.comms_vtable = (const painter_comms_vtable_t *)&spi_comms_with_dc_vtable;
driver->base.native_bits_per_pixel = 16; // RGB565
driver->base.panel_width = panel_width;
driver->base.panel_height = panel_height;
driver->base.rotation = QP_ROTATION_0;
driver->base.offset_x = 0;
driver->base.offset_y = 0;
// SPI and other pin configuration
driver->base.comms_config = &driver->spi_dc_reset_config;
driver->spi_dc_reset_config.spi_config.chip_select_pin = chip_select_pin;
driver->spi_dc_reset_config.spi_config.divisor = spi_divisor;
driver->spi_dc_reset_config.spi_config.lsb_first = false;
driver->spi_dc_reset_config.spi_config.mode = spi_mode;
driver->spi_dc_reset_config.dc_pin = dc_pin;
driver->spi_dc_reset_config.reset_pin = reset_pin;
driver->spi_dc_reset_config.command_params_uses_command_pin = false;
if (!qp_internal_register_device((painter_device_t)driver)) {
memset(driver, 0, sizeof(tft_panel_dc_reset_painter_device_t));
return NULL;
}
return (painter_device_t)driver;
}
}
return NULL;
}
#endif // QUANTUM_PAINTER_GC9A01_SPI_ENABLE
|
