diff options
Diffstat (limited to 'platforms/chibios/boards/GENERIC_AT32_F415XX/configs')
| -rw-r--r-- | platforms/chibios/boards/GENERIC_AT32_F415XX/configs/config.h | 13 | ||||
| -rw-r--r-- | platforms/chibios/boards/GENERIC_AT32_F415XX/configs/mcuconf.h | 236 |
2 files changed, 249 insertions, 0 deletions
diff --git a/platforms/chibios/boards/GENERIC_AT32_F415XX/configs/config.h b/platforms/chibios/boards/GENERIC_AT32_F415XX/configs/config.h new file mode 100644 index 0000000000..da60447a0a --- /dev/null +++ b/platforms/chibios/boards/GENERIC_AT32_F415XX/configs/config.h @@ -0,0 +1,13 @@ +// Copyright 2023-2024 HorrorTroll <https://github.com/HorrorTroll> +// Copyright 2023-2024 Zhaqian <https://github.com/zhaqian12> +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#define BOARD_OTG_VBUSIG + +#define USB_ENDPOINTS_ARE_REORDERABLE + +#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP +# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE +#endif diff --git a/platforms/chibios/boards/GENERIC_AT32_F415XX/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_AT32_F415XX/configs/mcuconf.h new file mode 100644 index 0000000000..d148379fe1 --- /dev/null +++ b/platforms/chibios/boards/GENERIC_AT32_F415XX/configs/mcuconf.h @@ -0,0 +1,236 @@ +/* + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio + ChibiOS - Copyright (C) 2023..2024 HorrorTroll + ChibiOS - Copyright (C) 2023..2024 Zhaqian + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * AT32F415 drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define AT32F415_MCUCONF + +/* + * General settings. + */ +#define AT32_NO_INIT FALSE + +/* + * HAL driver system settings. + */ +#define AT32_HICK_ENABLED TRUE +#define AT32_LICK_ENABLED FALSE +#define AT32_HEXT_ENABLED TRUE +#define AT32_LEXT_ENABLED FALSE +#define AT32_SCLKSEL AT32_SCLKSEL_PLL +#define AT32_PLLRCS AT32_PLLRCS_HEXT +#define AT32_PLLHEXTDIV AT32_PLLHEXTDIV_DIV1 +#define AT32_PLLCFGEN AT32_PLLCFGEN_SOLID +#define AT32_PLLMULT_VALUE 18 +#define AT32_PLL_FR_VALUE 4 +#define AT32_PLL_MS_VALUE 1 +#define AT32_PLL_NS_VALUE 72 +#define AT32_AHBDIV AT32_AHBDIV_DIV1 +#define AT32_APB1DIV AT32_APB1DIV_DIV2 +#define AT32_APB2DIV AT32_APB2DIV_DIV2 +#define AT32_ADCDIV AT32_ADCDIV_DIV4 +#define AT32_USB_CLOCK_REQUIRED TRUE +#define AT32_USBDIV AT32_USBDIV_DIV3 +#define AT32_CLKOUT_SEL AT32_CLKOUT_SEL_NOCLOCK +#define AT32_CLKOUTDIV AT32_CLKOUTDIV_DIV1 +#define AT32_ERTCSEL AT32_ERTCSEL_HEXTDIV +#define AT32_PVM_ENABLE FALSE +#define AT32_PVMSEL AT32_PVMSEL_LEV1 + +/* + * IRQ system settings. + */ +#define AT32_IRQ_EXINT0_PRIORITY 6 +#define AT32_IRQ_EXINT1_PRIORITY 6 +#define AT32_IRQ_EXINT2_PRIORITY 6 +#define AT32_IRQ_EXINT3_PRIORITY 6 +#define AT32_IRQ_EXINT4_PRIORITY 6 +#define AT32_IRQ_EXINT5_9_PRIORITY 6 +#define AT32_IRQ_EXINT10_15_PRIORITY 6 +#define AT32_IRQ_EXINT16_PRIORITY 6 +#define AT32_IRQ_EXINT17_PRIORITY 15 +#define AT32_IRQ_EXINT18_PRIORITY 6 +#define AT32_IRQ_EXINT19_PRIORITY 6 +#define AT32_IRQ_EXINT20_PRIORITY 6 +#define AT32_IRQ_EXINT21_PRIORITY 15 +#define AT32_IRQ_EXINT22_PRIORITY 15 + +#define AT32_IRQ_TMR1_BRK_TMR9_PRIORITY 7 +#define AT32_IRQ_TMR1_OVF_TMR10_PRIORITY 7 +#define AT32_IRQ_TMR1_HALL_TMR11_PRIORITY 7 +#define AT32_IRQ_TMR1_CH_PRIORITY 7 +#define AT32_IRQ_TMR2_PRIORITY 7 +#define AT32_IRQ_TMR3_PRIORITY 7 +#define AT32_IRQ_TMR4_PRIORITY 7 +#define AT32_IRQ_TMR5_PRIORITY 7 + +#define AT32_IRQ_USART1_PRIORITY 12 +#define AT32_IRQ_USART2_PRIORITY 12 +#define AT32_IRQ_USART3_PRIORITY 12 +#define AT32_IRQ_UART4_PRIORITY 12 +#define AT32_IRQ_UART5_PRIORITY 12 + +/* + * ADC driver system settings. + */ +#define AT32_ADC_USE_ADC1 FALSE +#define AT32_ADC_ADC1_DMA_PRIORITY 2 +#define AT32_ADC_ADC1_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define AT32_CAN_USE_CAN1 FALSE +#define AT32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * DMA driver system settings. + */ +#define AT32_DMA_USE_DMAMUX TRUE + +/* + * GPT driver system settings. + */ +#define AT32_GPT_USE_TMR1 FALSE +#define AT32_GPT_USE_TMR2 FALSE +#define AT32_GPT_USE_TMR3 FALSE +#define AT32_GPT_USE_TMR4 FALSE +#define AT32_GPT_USE_TMR5 FALSE +#define AT32_GPT_USE_TMR9 FALSE +#define AT32_GPT_USE_TMR10 FALSE +#define AT32_GPT_USE_TMR11 FALSE + +/* + * I2C driver system settings. + */ +#define AT32_I2C_USE_I2C1 FALSE +#define AT32_I2C_USE_I2C2 FALSE +#define AT32_I2C_BUSY_TIMEOUT 50 +#define AT32_I2C_I2C1_IRQ_PRIORITY 5 +#define AT32_I2C_I2C2_IRQ_PRIORITY 5 +#define AT32_I2C_I2C1_DMA_PRIORITY 3 +#define AT32_I2C_I2C2_DMA_PRIORITY 3 +#define AT32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define AT32_ICU_USE_TMR1 FALSE +#define AT32_ICU_USE_TMR2 FALSE +#define AT32_ICU_USE_TMR3 FALSE +#define AT32_ICU_USE_TMR4 FALSE +#define AT32_ICU_USE_TMR5 FALSE +#define AT32_ICU_USE_TMR9 FALSE +#define AT32_ICU_USE_TMR10 FALSE +#define AT32_ICU_USE_TMR11 FALSE + +/* + * PWM driver system settings. + */ +#define AT32_PWM_USE_TMR1 FALSE +#define AT32_PWM_USE_TMR2 FALSE +#define AT32_PWM_USE_TMR3 FALSE +#define AT32_PWM_USE_TMR4 FALSE +#define AT32_PWM_USE_TMR5 FALSE +#define AT32_PWM_USE_TMR9 FALSE +#define AT32_PWM_USE_TMR10 FALSE +#define AT32_PWM_USE_TMR11 FALSE + +/* + * RTC driver system settings. + */ +#define AT32_ERTC_DIVA_VALUE 32 +#define AT32_ERTC_DIVB_VALUE 1024 +#define AT32_ERTC_CTRL_INIT 0 +#define AT32_ERTC_TAMP_INIT 0 + +/* + * SDC driver system settings. + */ +#define AT32_SDC_SDIO_DMA_PRIORITY 3 +#define AT32_SDC_SDIO_IRQ_PRIORITY 9 +#define AT32_SDC_WRITE_TIMEOUT_MS 1000 +#define AT32_SDC_READ_TIMEOUT_MS 1000 +#define AT32_SDC_CLOCK_ACTIVATION_DELAY 10 +#define AT32_SDC_SDIO_UNALIGNED_SUPPORT TRUE + +/* + * SERIAL driver system settings. + */ +#define AT32_SERIAL_USE_USART1 FALSE +#define AT32_SERIAL_USE_USART2 FALSE +#define AT32_SERIAL_USE_USART3 FALSE +#define AT32_SERIAL_USE_UART4 FALSE +#define AT32_SERIAL_USE_UART5 FALSE + +/* + * SPI driver system settings. + */ +#define AT32_SPI_USE_SPI1 FALSE +#define AT32_SPI_USE_SPI2 FALSE +#define AT32_SPI_SPI1_DMA_PRIORITY 1 +#define AT32_SPI_SPI2_DMA_PRIORITY 1 +#define AT32_SPI_SPI1_IRQ_PRIORITY 10 +#define AT32_SPI_SPI2_IRQ_PRIORITY 10 +#define AT32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define AT32_ST_IRQ_PRIORITY 8 +#define AT32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define AT32_UART_USE_USART1 FALSE +#define AT32_UART_USE_USART2 FALSE +#define AT32_UART_USE_USART3 FALSE +#define AT32_UART_USART1_DMA_PRIORITY 0 +#define AT32_UART_USART2_DMA_PRIORITY 0 +#define AT32_UART_USART3_DMA_PRIORITY 0 +#define AT32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define AT32_USB_USE_OTG1 TRUE +#define AT32_USB_OTG1_IRQ_PRIORITY 14 +#define AT32_USB_OTG1_RX_FIFO_SIZE 512 + +/* + * WDG driver system settings. + */ +#define AT32_WDG_USE_WDT FALSE + +#endif /* MCUCONF_H */ |