diff options
Diffstat (limited to 'platforms/chibios/boards/GENERIC_AT32_F415XX/board/board.h')
| -rw-r--r-- | platforms/chibios/boards/GENERIC_AT32_F415XX/board/board.h | 207 |
1 files changed, 207 insertions, 0 deletions
diff --git a/platforms/chibios/boards/GENERIC_AT32_F415XX/board/board.h b/platforms/chibios/boards/GENERIC_AT32_F415XX/board/board.h new file mode 100644 index 0000000000..c3ade198ba --- /dev/null +++ b/platforms/chibios/boards/GENERIC_AT32_F415XX/board/board.h @@ -0,0 +1,207 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2023..2024 HorrorTroll + ChibiOS - Copyright (C) 2023..2024 Zhaqian + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +/*===========================================================================*/ +/* Driver constants. */ +/*===========================================================================*/ + +/* + * Setup for a Generic AT32F415 board. + */ + +/* + * Board identifier. + */ +#define BOARD_GENERIC_AT32_F415XX +#define BOARD_NAME "GENERIC AT32F415 board" + +/* + * Board oscillators-related settings. + */ +#if !defined(AT32_LEXTCLK) +#define AT32_LEXTCLK 32768 +#endif + +#if !defined(AT32_HEXTCLK) +#define AT32_HEXTCLK 8000000 +#endif + +/* + * MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h. + */ +#define AT32F415KB + +/* + * IO pins assignments. + */ +#define GPIOA_PIN0 0U +#define GPIOA_PIN1 1U +#define GPIOA_PIN2 2U +#define GPIOA_PIN3 3U +#define GPIOA_PIN4 4U +#define GPIOA_PIN5 5U +#define GPIOA_PIN6 6U +#define GPIOA_PIN7 7U +#define GPIOA_PIN8 8U +#define GPIOA_PIN9 9U +#define GPIOA_PIN10 10U +#define GPIOA_PIN11 11U +#define GPIOA_PIN12 12U +#define GPIOA_SWDIO 13U +#define GPIOA_SWCLK 14U +#define GPIOA_PIN15 15U + +#define GPIOB_PIN0 0U +#define GPIOB_PIN1 1U +#define GPIOB_PIN2 2U +#define GPIOB_PIN3 3U +#define GPIOB_PIN4 4U +#define GPIOB_PIN5 5U +#define GPIOB_PIN6 6U +#define GPIOB_PIN7 7U +#define GPIOB_PIN8 8U +#define GPIOB_PIN9 9U +#define GPIOB_PIN10 10U +#define GPIOB_PIN11 11U +#define GPIOB_PIN12 12U +#define GPIOB_PIN13 13U +#define GPIOB_PIN14 14U +#define GPIOB_PIN15 15U + +#define GPIOC_PIN0 0U +#define GPIOC_PIN1 1U +#define GPIOC_PIN2 2U +#define GPIOC_PIN3 3U +#define GPIOC_PIN4 4U +#define GPIOC_PIN5 5U +#define GPIOC_PIN6 6U +#define GPIOC_PIN7 7U +#define GPIOC_PIN8 8U +#define GPIOC_PIN9 9U +#define GPIOC_PIN10 10U +#define GPIOC_PIN11 11U +#define GPIOC_PIN12 12U +#define GPIOC_PIN13 13U +#define GPIOC_PIN14 14U +#define GPIOC_PIN15 15U + +#define GPIOD_HEXT_IN 0U +#define GPIOD_HEXT_OUT 1U +#define GPIOD_PIN2 2U + +#define GPIOF_PIN4 4U +#define GPIOF_PIN5 5U +#define GPIOF_PIN6 6U +#define GPIOF_PIN7 7U + +/*===========================================================================*/ +/* Driver pre-compile time settings. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Derived constants and error checks. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver data structures and types. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver macros. */ +/*===========================================================================*/ + +/* + * I/O ports initial setup, this configuration is established soon after reset + * in the initialization code. + * + * The digits have the following meaning: + * 0 - Analog input. + * 1 - Push Pull output 10MHz. + * 2 - Push Pull output 2MHz. + * 3 - Push Pull output 50MHz. + * 4 - Digital input. + * 5 - Open Drain output 10MHz. + * 6 - Open Drain output 2MHz. + * 7 - Open Drain output 50MHz. + * 8 - Digital input with Pull-Up or Pull-Down resistor depending on ODT. + * 9 - Alternate Push Pull output 10MHz. + * A - Alternate Push Pull output 2MHz. + * B - Alternate Push Pull output 50MHz. + * C - Reserved. + * D - Alternate Open Drain output 10MHz. + * E - Alternate Open Drain output 2MHz. + * F - Alternate Open Drain output 50MHz. + * Please refer to the AT32 Reference Manual for details. + */ + +/* + * Port A setup. + */ +#define VAL_GPIOACFGLR 0x88888B88 /* PA7...PA0 */ +#define VAL_GPIOACFGHR 0x888888B8 /* PA15...PA8 */ +#define VAL_GPIOAODT 0xFFFFFFFF + +/* + * Port B setup. + */ +#define VAL_GPIOBCFGLR 0x88888888 /* PB7...PB0 */ +#define VAL_GPIOBCFGHR 0x88888888 /* PB15...PB8 */ +#define VAL_GPIOBODT 0xFFFFFFFF + +/* + * Port C setup. + */ +#define VAL_GPIOCCFGLR 0x88888888 /* PC7...PC0 */ +#define VAL_GPIOCCFGHR 0x88888888 /* PC15...PC8 */ +#define VAL_GPIOCODT 0xFFFFFFFF + +/* + * Port D setup. + * Everything input with pull-up except: + * PD0 - Normal input (GPIOD_HEXT_IN). + * PD1 - Normal input (GPIOD_HEXT_OUT). + */ +#define VAL_GPIODCFGLR 0x88888844 /* PD7...PD0 */ +#define VAL_GPIODCFGHR 0x88888888 /* PD15...PD8 */ +#define VAL_GPIODODT 0xFFFFFFFF + +/* + * Port F setup. + */ +#define VAL_GPIOFCFGLR 0x88888888 /* PF7...PF0 */ +#define VAL_GPIOFCFGHR 0x88888888 /* PF15...PF8 */ +#define VAL_GPIOFODT 0xFFFFFFFF + +/*===========================================================================*/ +/* External declarations. */ +/*===========================================================================*/ + +#if !defined(_FROM_ASM_) +#ifdef __cplusplus +extern "C" { +#endif + void boardInit(void); +#ifdef __cplusplus +} +#endif +#endif /* _FROM_ASM_ */ + +#endif /* _BOARD_H_ */ |