diff options
Diffstat (limited to 'keyboards/zykrah/fuyu_hs/readme.md')
| -rw-r--r-- | keyboards/zykrah/fuyu_hs/readme.md | 27 |
1 files changed, 27 insertions, 0 deletions
diff --git a/keyboards/zykrah/fuyu_hs/readme.md b/keyboards/zykrah/fuyu_hs/readme.md new file mode 100644 index 0000000000..41c5cded51 --- /dev/null +++ b/keyboards/zykrah/fuyu_hs/readme.md @@ -0,0 +1,27 @@ +# FUYU HOTSWAP + + + +An F12 TKL Hotswappable H87-Compat Type-C PCB for the Geon F1-8K + +* Keyboard Maintainer: [Zykrah](https://github.com/zykrah) +* Hardware Supported: Fuyu HS 7u rev1, Fuyu HS 6.25u rev1 +* Hardware Availability: [Github Repo](https://github.com/zykrah/fuyu), [GEON Store](https://geon.works/products/fuyu-pcb-for-f1-8k), [Cafege](https://cafege.com.au/products/fuyu-8k-pcb) + +Make example for this keyboard (after setting up your build environment): + + make zykrah/fuyu_hs:default + +Flashing example for this keyboard: + + make zykrah/fuyu_hs:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly short the `RST` and `GND` pads on the SWD header twice, or short the `BOOT` header and plug in keyboard +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available |