Merge remote-tracking branch 'upstream/master'

* upstream/master: (1239 commits)
  Update ez.c
  removes planck/rev3 temporarily
  Move hand_swap_config to ez.c, removes error for infinity
  Update Makefile
  ergodox: Update algernon's keymap to v1.9
  Added VS Code dir to .gitignore
  Support the Pegasus Hoof controller.
  [Jack & Erez] Simplifies and documents TO
  add readme
  use wait_ms instead of _delay_ms
  add messenger
  init keymap
  Add example keymap
  Adding whiskey_tango_foxtrot_capslock ergodox keymap
  Unicode map framework. Allow unicode up to 0xFFFFF using separate mapping table
  CIE 1931 dim curve
  Apply the dim curve to the RGB output
  Update the Cluecard readme files
  Tune snake and knight intervals for Cluecard
  Tunable RGB light intervals
  ...

11 files changed, 1074 insertions, 1074 deletions

diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.c b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.c
index f66a483e6e..58bb338927 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.c
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/BootloaderCDC.c
@@ -327,7 +327,7 @@ static void ReadWriteMemoryBlock(const uint8_t Command)
 			else
 			{
 				/* Write the next EEPROM byte from the endpoint */
-				eeprom_write_byte((uint8_t*)((intptr_t)(CurrAddress >> 1)), FetchNextCommandByte());
+				eeprom_update_byte((uint8_t*)((intptr_t)(CurrAddress >> 1)), FetchNextCommandByte());
 
 				/* Increment the address counter after use */
 				CurrAddress += 2;
@@ -581,7 +581,7 @@ static void CDC_Task(void)
 	else if (Command == AVR109_COMMAND_WriteEEPROM)
 	{
 		/* Read the byte from the endpoint and write it to the EEPROM */
-		eeprom_write_byte((uint8_t*)((intptr_t)(CurrAddress >> 1)), FetchNextCommandByte());
+		eeprom_update_byte((uint8_t*)((intptr_t)(CurrAddress >> 1)), FetchNextCommandByte());
 
 		/* Increment the address after use */
 		CurrAddress += 2;
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/asf.xml
index 72f3ff04c7..02e7063c66 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/asf.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/CDC/asf.xml
@@ -1,161 +1,161 @@
-<asf xmlversion="1.0">

-	<project caption="CDC Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.128_4" force-caption="true" workspace-name="lufa_cdc_128kb_4kb_">

-		<require idref="lufa.bootloaders.cdc"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="CDC Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.64_4" force-caption="true" workspace-name="lufa_cdc_64kb_4kb_">

-		<require idref="lufa.bootloaders.cdc"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb647"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="CDC Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.32_4" force-caption="true" workspace-name="lufa_cdc_32kb_4kb_">

-		<require idref="lufa.bootloaders.cdc"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega32u4"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="CDC Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.16_4" force-caption="true" workspace-name="lufa_cdc_16kb_4kb_">

-		<require idref="lufa.bootloaders.cdc"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega16u2"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="CDC Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.8_4" force-caption="true" workspace-name="lufa_cdc_8kb_4kb_">

-		<require idref="lufa.bootloaders.cdc"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega8u2"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x1000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<module type="application" id="lufa.bootloaders.cdc" caption="CDC Bootloader">

-		<info type="description" value="summary">

-		CDC Class Bootloader, capable of reprogramming a device using avrdude or other AVR109 protocol compliant software when plugged into a host.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Bootloaders"/>

-			<keyword value="USB Device"/>

-		</info>

-

- 		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="include-path" value="."/>

-		<build type="c-source" value="BootloaderCDC.c"/>

-		<build type="header-file" value="BootloaderCDC.h"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="Descriptors.h"/>

-		<build type="c-source" value="BootloaderAPI.c"/>

-		<build type="header-file" value="BootloaderAPI.h"/>

-		<build type="asm-source" value="BootloaderAPITable.S"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="BootloaderCDC.txt"/>

-		<build type="distribute" subtype="user-file" value="LUFA CDC Bootloader.inf"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

+<asf xmlversion="1.0">
+	<project caption="CDC Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.128_4" force-caption="true" workspace-name="lufa_cdc_128kb_4kb_">
+		<require idref="lufa.bootloaders.cdc"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb1287"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="CDC Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.64_4" force-caption="true" workspace-name="lufa_cdc_64kb_4kb_">
+		<require idref="lufa.bootloaders.cdc"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb647"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="CDC Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.32_4" force-caption="true" workspace-name="lufa_cdc_32kb_4kb_">
+		<require idref="lufa.bootloaders.cdc"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega32u4"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="CDC Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.16_4" force-caption="true" workspace-name="lufa_cdc_16kb_4kb_">
+		<require idref="lufa.bootloaders.cdc"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega16u2"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="CDC Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.8_4" force-caption="true" workspace-name="lufa_cdc_8kb_4kb_">
+		<require idref="lufa.bootloaders.cdc"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega8u2"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x1000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<module type="application" id="lufa.bootloaders.cdc" caption="CDC Bootloader">
+		<info type="description" value="summary">
+		CDC Class Bootloader, capable of reprogramming a device using avrdude or other AVR109 protocol compliant software when plugged into a host.
+		</info>
+
+ 		<info type="gui-flag" value="move-to-root"/>
+
+		<info type="keyword" value="Technology">
+			<keyword value="Bootloaders"/>
+			<keyword value="USB Device"/>
+		</info>
+
+ 		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_uc3"/>
+
+		<build type="include-path" value="."/>
+		<build type="c-source" value="BootloaderCDC.c"/>
+		<build type="header-file" value="BootloaderCDC.h"/>
+		<build type="c-source" value="Descriptors.c"/>
+		<build type="header-file" value="Descriptors.h"/>
+		<build type="c-source" value="BootloaderAPI.c"/>
+		<build type="header-file" value="BootloaderAPI.h"/>
+		<build type="asm-source" value="BootloaderAPITable.S"/>
+
+		<build type="module-config" subtype="path" value="Config"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/AppConfig.h"/>
+
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="BootloaderCDC.txt"/>
+		<build type="distribute" subtype="user-file" value="LUFA CDC Bootloader.inf"/>
+
+		<require idref="lufa.common"/>
+		<require idref="lufa.platform"/>
+		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board.leds"/>
+	</module>
+</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/BootloaderDFU.c b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/BootloaderDFU.c
index 0385bfc497..00e673268a 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/BootloaderDFU.c
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/BootloaderDFU.c
@@ -370,7 +370,7 @@ void EVENT_USB_Device_ControlRequest(void)
 							}
 
 							/* Read the byte from the USB interface and write to to the EEPROM */
-							eeprom_write_byte((uint8_t*)StartAddr, Endpoint_Read_8());
+							eeprom_update_byte((uint8_t*)StartAddr, Endpoint_Read_8());
 
 							/* Adjust counters */
 							StartAddr++;
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/asf.xml
index 6f3312b764..f56aba69f5 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/asf.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/DFU/asf.xml
@@ -1,156 +1,156 @@
-<asf xmlversion="1.0">

-	<project caption="DFU Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.128_4" force-caption="true" workspace-name="lufa_dfu_128kb_4kb_">

-		<require idref="lufa.bootloaders.dfu"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="DFU Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.64_4" force-caption="true" workspace-name="lufa_dfu_64kb_4kb_">

-		<require idref="lufa.bootloaders.dfu"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb647"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="DFU Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.32_4" force-caption="true" workspace-name="lufa_dfu_32kb_4kb_">

-		<require idref="lufa.bootloaders.dfu"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega32u4"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="DFU Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.16_4" force-caption="true" workspace-name="lufa_dfu_16kb_4kb_">

-		<require idref="lufa.bootloaders.dfu"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega16u2"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="DFU Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.8_4" force-caption="true" workspace-name="lufa_dfu_8kb_4kb_">

-		<require idref="lufa.bootloaders.dfu"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega8u2"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x1000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<module type="application" id="lufa.bootloaders.dfu" caption="DFU Bootloader">

-		<info type="description" value="summary">

-		DFU Class Bootloader, capable of reprogramming a device using the Atmel FLIP or other AVR DFU programming software when plugged into a host.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Bootloaders"/>

-			<keyword value="USB Device"/>

-		</info>

-

- 		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="include-path" value="."/>

-		<build type="c-source" value="BootloaderDFU.c"/>

-		<build type="header-file" value="BootloaderDFU.h"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="Descriptors.h"/>

-		<build type="c-source" value="BootloaderAPI.c"/>

-		<build type="header-file" value="BootloaderAPI.h"/>

-		<build type="asm-source" value="BootloaderAPITable.S"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="BootloaderDFU.txt"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

+<asf xmlversion="1.0">
+	<project caption="DFU Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.128_4" force-caption="true" workspace-name="lufa_dfu_128kb_4kb_">
+		<require idref="lufa.bootloaders.dfu"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb1287"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="DFU Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.64_4" force-caption="true" workspace-name="lufa_dfu_64kb_4kb_">
+		<require idref="lufa.bootloaders.dfu"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb647"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="DFU Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.32_4" force-caption="true" workspace-name="lufa_dfu_32kb_4kb_">
+		<require idref="lufa.bootloaders.dfu"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega32u4"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="DFU Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.16_4" force-caption="true" workspace-name="lufa_dfu_16kb_4kb_">
+		<require idref="lufa.bootloaders.dfu"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega16u2"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="DFU Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.8_4" force-caption="true" workspace-name="lufa_dfu_8kb_4kb_">
+		<require idref="lufa.bootloaders.dfu"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega8u2"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x1000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<module type="application" id="lufa.bootloaders.dfu" caption="DFU Bootloader">
+		<info type="description" value="summary">
+		DFU Class Bootloader, capable of reprogramming a device using the Atmel FLIP or other AVR DFU programming software when plugged into a host.
+		</info>
+
+ 		<info type="gui-flag" value="move-to-root"/>
+
+		<info type="keyword" value="Technology">
+			<keyword value="Bootloaders"/>
+			<keyword value="USB Device"/>
+		</info>
+
+ 		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_uc3"/>
+
+		<build type="include-path" value="."/>
+		<build type="c-source" value="BootloaderDFU.c"/>
+		<build type="header-file" value="BootloaderDFU.h"/>
+		<build type="c-source" value="Descriptors.c"/>
+		<build type="header-file" value="Descriptors.h"/>
+		<build type="c-source" value="BootloaderAPI.c"/>
+		<build type="header-file" value="BootloaderAPI.h"/>
+		<build type="asm-source" value="BootloaderAPITable.S"/>
+
+		<build type="module-config" subtype="path" value="Config"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/AppConfig.h"/>
+
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="BootloaderDFU.txt"/>
+
+		<require idref="lufa.common"/>
+		<require idref="lufa.platform"/>
+		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board.leds"/>
+	</module>
+</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/asf.xml
index 9394b13530..c67b9419ed 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/asf.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/asf.xml
@@ -1,123 +1,123 @@
-<asf xmlversion="1.0">

-	<project caption="HID Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.128_4" force-caption="true" workspace-name="lufa_hid_128kb_4kb_">

-		<require idref="lufa.bootloaders.hid"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>

-	</project>

-

-	<project caption="HID Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.64_4" force-caption="true" workspace-name="lufa_hid_64kb_4kb_">

-		<require idref="lufa.bootloaders.hid"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb647"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>

-	</project>

-

-	<project caption="HID Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.32_4" force-caption="true" workspace-name="lufa_hid_32kb_4kb_">

-		<require idref="lufa.bootloaders.hid"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega32u4"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>

-	</project>

-

-	<project caption="HID Bootloader - 16KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.16_2" force-caption="true" workspace-name="lufa_hid_16kb_2kb_">

-		<require idref="lufa.bootloaders.hid"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega16u2"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x3800"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3800"/>

-	</project>

-

-	<project caption="HID Bootloader - 8KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.8_2" force-caption="true" workspace-name="lufa_hid_8kb_2kb_">

-		<require idref="lufa.bootloaders.hid"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega8u2"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x1800"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1800"/>

-	</project>

-

-	<module type="application" id="lufa.bootloaders.hid" caption="HID Bootloader">

-		<info type="description" value="summary">

-		HID Class Bootloader, capable of reprogramming a device via a custom cross-platform command line utility when plugged into a host.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Bootloaders"/>

-			<keyword value="USB Device"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="include-path" value="."/>

-		<build type="c-source" value="BootloaderHID.c"/>

-		<build type="header-file" value="BootloaderHID.h"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="Descriptors.h"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="BootloaderHID.txt"/>

-		<build type="distribute" subtype="directory" value="HostLoaderApp"/>

-		<build type="distribute" subtype="directory" value="HostLoaderApp_Python"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

+<asf xmlversion="1.0">
+	<project caption="HID Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.128_4" force-caption="true" workspace-name="lufa_hid_128kb_4kb_">
+		<require idref="lufa.bootloaders.hid"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb1287"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
+	</project>
+
+	<project caption="HID Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.64_4" force-caption="true" workspace-name="lufa_hid_64kb_4kb_">
+		<require idref="lufa.bootloaders.hid"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb647"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
+	</project>
+
+	<project caption="HID Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.32_4" force-caption="true" workspace-name="lufa_hid_32kb_4kb_">
+		<require idref="lufa.bootloaders.hid"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega32u4"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+	</project>
+
+	<project caption="HID Bootloader - 16KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.16_2" force-caption="true" workspace-name="lufa_hid_16kb_2kb_">
+		<require idref="lufa.bootloaders.hid"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega16u2"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x3800"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3800"/>
+	</project>
+
+	<project caption="HID Bootloader - 8KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.8_2" force-caption="true" workspace-name="lufa_hid_8kb_2kb_">
+		<require idref="lufa.bootloaders.hid"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega8u2"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x1800"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1800"/>
+	</project>
+
+	<module type="application" id="lufa.bootloaders.hid" caption="HID Bootloader">
+		<info type="description" value="summary">
+		HID Class Bootloader, capable of reprogramming a device via a custom cross-platform command line utility when plugged into a host.
+		</info>
+
+ 		<info type="gui-flag" value="move-to-root"/>
+
+		<info type="keyword" value="Technology">
+			<keyword value="Bootloaders"/>
+			<keyword value="USB Device"/>
+		</info>
+
+		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_uc3"/>
+
+		<build type="include-path" value="."/>
+		<build type="c-source" value="BootloaderHID.c"/>
+		<build type="header-file" value="BootloaderHID.h"/>
+		<build type="c-source" value="Descriptors.c"/>
+		<build type="header-file" value="Descriptors.h"/>
+
+		<build type="module-config" subtype="path" value="Config"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
+
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="BootloaderHID.txt"/>
+		<build type="distribute" subtype="directory" value="HostLoaderApp"/>
+		<build type="distribute" subtype="directory" value="HostLoaderApp_Python"/>
+
+		<require idref="lufa.common"/>
+		<require idref="lufa.platform"/>
+		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board.leds"/>
+	</module>
+</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderAPITable.S b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderAPITable.S
index 6844d4b01c..91fc949666 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderAPITable.S
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/BootloaderAPITable.S
@@ -1,102 +1,102 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2014.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-*/

-

-/*

-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaims all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-#if AUX_BOOT_SECTION_SIZE > 0

-#warning Using a AUX bootloader section in addition to the defined bootloader space (see documentation).

-

-; Trampoline to jump over the AUX bootloader section to the start of the bootloader,

-; on devices where an AUX bootloader section is used.

-.section .boot_aux_trampoline, "ax"

-.global Boot_AUX_Trampoline

-Boot_AUX_Trampoline:

-	jmp BOOT_START_ADDR

-#endif

-

-; Trampolines to actual API implementations if the target address is outside the

-; range of a rjmp instruction (can happen with large bootloader sections)

-.section .apitable_trampolines, "ax"

-.global BootloaderAPI_Trampolines

-BootloaderAPI_Trampolines:

-

-	BootloaderAPI_ErasePage_Trampoline:

-		jmp BootloaderAPI_ErasePage

-	BootloaderAPI_WritePage_Trampoline:

-		jmp BootloaderAPI_WritePage

-	BootloaderAPI_FillWord_Trampoline:

-		jmp BootloaderAPI_FillWord

-	BootloaderAPI_ReadSignature_Trampoline:

-		jmp BootloaderAPI_ReadSignature

-	BootloaderAPI_ReadFuse_Trampoline:

-		jmp BootloaderAPI_ReadFuse

-	BootloaderAPI_ReadLock_Trampoline:

-		jmp BootloaderAPI_ReadLock

-	BootloaderAPI_WriteLock_Trampoline:

-		jmp BootloaderAPI_WriteLock

-	BootloaderAPI_UNUSED1:

-		ret

-	BootloaderAPI_UNUSED2:

-		ret

-	BootloaderAPI_UNUSED3:

-		ret

-	BootloaderAPI_UNUSED4:

-		ret

-	BootloaderAPI_UNUSED5:

-		ret

-

-

-

-; API function jump table

-.section .apitable_jumptable, "ax"

-.global BootloaderAPI_JumpTable

-BootloaderAPI_JumpTable:

-

-	rjmp BootloaderAPI_ErasePage_Trampoline

-	rjmp BootloaderAPI_WritePage_Trampoline

-	rjmp BootloaderAPI_FillWord_Trampoline

-	rjmp BootloaderAPI_ReadSignature_Trampoline

-	rjmp BootloaderAPI_ReadFuse_Trampoline

-	rjmp BootloaderAPI_ReadLock_Trampoline

-	rjmp BootloaderAPI_WriteLock_Trampoline

-	rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1

-	rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2

-	rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3

-	rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4

-	rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5

-

-

-

-; Bootloader table signatures and information

-.section .apitable_signatures, "ax"

-.global BootloaderAPI_Signatures

-BootloaderAPI_Signatures:

-

-	.long BOOT_START_ADDR ; Start address of the bootloader

-	.word 0xDF30 ; Signature for the MS class bootloader, V1

-	.word 0xDCFB ; Signature for a LUFA class bootloader

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2014.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+#if AUX_BOOT_SECTION_SIZE > 0
+#warning Using a AUX bootloader section in addition to the defined bootloader space (see documentation).
+
+; Trampoline to jump over the AUX bootloader section to the start of the bootloader,
+; on devices where an AUX bootloader section is used.
+.section .boot_aux_trampoline, "ax"
+.global Boot_AUX_Trampoline
+Boot_AUX_Trampoline:
+	jmp BOOT_START_ADDR
+#endif
+
+; Trampolines to actual API implementations if the target address is outside the
+; range of a rjmp instruction (can happen with large bootloader sections)
+.section .apitable_trampolines, "ax"
+.global BootloaderAPI_Trampolines
+BootloaderAPI_Trampolines:
+
+	BootloaderAPI_ErasePage_Trampoline:
+		jmp BootloaderAPI_ErasePage
+	BootloaderAPI_WritePage_Trampoline:
+		jmp BootloaderAPI_WritePage
+	BootloaderAPI_FillWord_Trampoline:
+		jmp BootloaderAPI_FillWord
+	BootloaderAPI_ReadSignature_Trampoline:
+		jmp BootloaderAPI_ReadSignature
+	BootloaderAPI_ReadFuse_Trampoline:
+		jmp BootloaderAPI_ReadFuse
+	BootloaderAPI_ReadLock_Trampoline:
+		jmp BootloaderAPI_ReadLock
+	BootloaderAPI_WriteLock_Trampoline:
+		jmp BootloaderAPI_WriteLock
+	BootloaderAPI_UNUSED1:
+		ret
+	BootloaderAPI_UNUSED2:
+		ret
+	BootloaderAPI_UNUSED3:
+		ret
+	BootloaderAPI_UNUSED4:
+		ret
+	BootloaderAPI_UNUSED5:
+		ret
+
+
+
+; API function jump table
+.section .apitable_jumptable, "ax"
+.global BootloaderAPI_JumpTable
+BootloaderAPI_JumpTable:
+
+	rjmp BootloaderAPI_ErasePage_Trampoline
+	rjmp BootloaderAPI_WritePage_Trampoline
+	rjmp BootloaderAPI_FillWord_Trampoline
+	rjmp BootloaderAPI_ReadSignature_Trampoline
+	rjmp BootloaderAPI_ReadFuse_Trampoline
+	rjmp BootloaderAPI_ReadLock_Trampoline
+	rjmp BootloaderAPI_WriteLock_Trampoline
+	rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1
+	rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2
+	rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3
+	rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4
+	rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5
+
+
+
+; Bootloader table signatures and information
+.section .apitable_signatures, "ax"
+.global BootloaderAPI_Signatures
+BootloaderAPI_Signatures:
+
+	.long BOOT_START_ADDR ; Start address of the bootloader
+	.word 0xDF30 ; Signature for the MS class bootloader, V1
+	.word 0xDCFB ; Signature for a LUFA class bootloader
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/asf.xml
index f1d550d1eb..700ffa26ff 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/asf.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/asf.xml
@@ -1,156 +1,156 @@
-<asf xmlversion="1.0">

-	<project caption="Mass Storage Bootloader - 128KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.128_8" force-caption="true" workspace-name="lufa_ms_128kb_8kb_">

-		<require idref="lufa.bootloaders.mass_storage"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x1E000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1E000"/>

-

-		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="Mass Storage Bootloader - 64KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.64_8" force-caption="true" workspace-name="lufa_ms_64kb_8kb_">

-		<require idref="lufa.bootloaders.mass_storage"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb647"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0xE000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0xE000"/>

-

-		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="Mass Storage Bootloader - 32KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.32_4" force-caption="true" workspace-name="lufa_ms_32kb_4kb_">

-		<require idref="lufa.bootloaders.mass_storage"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega32u4"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>

-

-		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x6810"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x6800"/>

-		<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="Mass Storage Bootloader - 16KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.16_4" force-caption="true" workspace-name="lufa_ms_16kb_4kb_">

-		<require idref="lufa.bootloaders.mass_storage"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega16u2"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>

-

-		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x2810"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x2800"/>

-		<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<module type="application" id="lufa.bootloaders.mass_storage" caption="Mass Storage Bootloader">

-		<info type="description" value="summary">

-		Mass Storage Class Bootloader, capable of reprogramming a device via binary BIN files copied to the virtual FAT12 file-system it creates when plugged into a host.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Bootloaders"/>

-			<keyword value="USB Device"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="include-path" value="."/>

-		<build type="c-source" value="BootloaderMassStorage.c"/>

-		<build type="header-file" value="BootloaderMassStorage.h"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="Descriptors.h"/>

-		<build type="c-source" value="BootloaderAPI.c"/>

-		<build type="header-file" value="BootloaderAPI.h"/>

-		<build type="asm-source" value="BootloaderAPITable.S"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-		<build type="header-file" value="Config/AppConfig.h"/>

-

-		<build type="include-path" value="Lib"/>

-		<build type="header-file" value="Lib/VirtualFAT.h"/>

-		<build type="c-source" value="Lib/VirtualFAT.c"/>

-		<build type="header-file" value="Lib/SCSI.h"/>

-		<build type="c-source" value="Lib/SCSI.c"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="BootloaderMassStorage.txt"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

+<asf xmlversion="1.0">
+	<project caption="Mass Storage Bootloader - 128KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.128_8" force-caption="true" workspace-name="lufa_ms_128kb_8kb_">
+		<require idref="lufa.bootloaders.mass_storage"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb1287"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x1E000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1E000"/>
+
+		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="Mass Storage Bootloader - 64KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.64_8" force-caption="true" workspace-name="lufa_ms_64kb_8kb_">
+		<require idref="lufa.bootloaders.mass_storage"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb647"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0xE000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0xE000"/>
+
+		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="Mass Storage Bootloader - 32KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.32_4" force-caption="true" workspace-name="lufa_ms_32kb_4kb_">
+		<require idref="lufa.bootloaders.mass_storage"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega32u4"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+
+		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x6810"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x6800"/>
+		<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="Mass Storage Bootloader - 16KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.16_4" force-caption="true" workspace-name="lufa_ms_16kb_4kb_">
+		<require idref="lufa.bootloaders.mass_storage"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega16u2"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
+
+		<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x2810"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x2800"/>
+		<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<module type="application" id="lufa.bootloaders.mass_storage" caption="Mass Storage Bootloader">
+		<info type="description" value="summary">
+		Mass Storage Class Bootloader, capable of reprogramming a device via binary BIN files copied to the virtual FAT12 file-system it creates when plugged into a host.
+		</info>
+
+ 		<info type="gui-flag" value="move-to-root"/>
+
+		<info type="keyword" value="Technology">
+			<keyword value="Bootloaders"/>
+			<keyword value="USB Device"/>
+		</info>
+
+		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_uc3"/>
+
+		<build type="include-path" value="."/>
+		<build type="c-source" value="BootloaderMassStorage.c"/>
+		<build type="header-file" value="BootloaderMassStorage.h"/>
+		<build type="c-source" value="Descriptors.c"/>
+		<build type="header-file" value="Descriptors.h"/>
+		<build type="c-source" value="BootloaderAPI.c"/>
+		<build type="header-file" value="BootloaderAPI.h"/>
+		<build type="asm-source" value="BootloaderAPITable.S"/>
+
+		<build type="module-config" subtype="path" value="Config"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
+		<build type="header-file" value="Config/AppConfig.h"/>
+
+		<build type="include-path" value="Lib"/>
+		<build type="header-file" value="Lib/VirtualFAT.h"/>
+		<build type="c-source" value="Lib/VirtualFAT.c"/>
+		<build type="header-file" value="Lib/SCSI.h"/>
+		<build type="c-source" value="Lib/SCSI.c"/>
+
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="BootloaderMassStorage.txt"/>
+
+		<require idref="lufa.common"/>
+		<require idref="lufa.platform"/>
+		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board.leds"/>
+	</module>
+</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/makefile b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/makefile
index 91bb4038e8..a0edb2c4f5 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/makefile
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/MassStorage/makefile
@@ -1,68 +1,68 @@
-#

-#             LUFA Library

-#     Copyright (C) Dean Camera, 2014.

-#

-#  dean [at] fourwalledcubicle [dot] com

-#           www.lufa-lib.org

-#

-# --------------------------------------

-#         LUFA Project Makefile.

-# --------------------------------------

-

-# Run "make help" for target help.

-

-MCU          = at90usb1287

-ARCH         = AVR8

-BOARD        = USBKEY

-F_CPU        = 8000000

-F_USB        = $(F_CPU)

-OPTIMIZATION = s

-TARGET       = BootloaderMassStorage

-SRC          = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S Lib/SCSI.c Lib/VirtualFAT.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)

-LUFA_PATH    = ../../LUFA

-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)

-LD_FLAGS     = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)

-

-# Flash size and bootloader section sizes of the target, in KB. These must

-# match the target's total FLASH size and the bootloader size set in the

-# device's fuses.

-FLASH_SIZE_KB         = 128

-BOOT_SECTION_SIZE_KB  = 8

-

-# Bootloader address calculation formulas

-# Do not modify these macros, but rather modify the dependent values above.

-CALC_ADDRESS_IN_HEX   = $(shell printf "0x%X" $$(( $(1) )) )

-BOOT_START_OFFSET     = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )

-BOOT_SEC_OFFSET       = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )

-

-# Bootloader linker section flags for relocating the API table sections to

-# known FLASH addresses - these should not normally be user-edited.

-BOOT_SECTION_LD_FLAG  = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))

-BOOT_API_LD_FLAGS     = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)

-BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable,   BootloaderAPI_JumpTable,   32)

-BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures,  BootloaderAPI_Signatures,  8)

-

-# Check if the bootloader needs an AUX section, located before the real bootloader section to store some of the

-# bootloader code. This is required for 32KB and smaller devices, where the actual bootloader is 6KB but the maximum

-# bootloader section size is 4KB. The actual usable application space will be reduced by 6KB for these devices.

-ifeq ($(BOOT_SECTION_SIZE_KB),8)

-  CC_FLAGS           += -DAUX_BOOT_SECTION_SIZE=0

-else

-  AUX_BOOT_SECTION_SIZE_KB = (6 - $(BOOT_SECTION_SIZE_KB))

-

-  CC_FLAGS           += -DAUX_BOOT_SECTION_SIZE='($(AUX_BOOT_SECTION_SIZE_KB) * 1024)'

-  LD_FLAGS           += -Wl,--section-start=.boot_aux=$(call BOOT_SEC_OFFSET, (($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024 - 16))

-  LD_FLAGS           += $(call BOOT_SECTION_LD_FLAG, .boot_aux_trampoline, Boot_AUX_Trampoline, ($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024)

-endif

-

-# Default target

-all:

-

-# Include LUFA build script makefiles

-include $(LUFA_PATH)/Build/lufa_core.mk

-include $(LUFA_PATH)/Build/lufa_sources.mk

-include $(LUFA_PATH)/Build/lufa_build.mk

-include $(LUFA_PATH)/Build/lufa_cppcheck.mk

-include $(LUFA_PATH)/Build/lufa_doxygen.mk

-include $(LUFA_PATH)/Build/lufa_avrdude.mk

-include $(LUFA_PATH)/Build/lufa_atprogram.mk

+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2014.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = BootloaderMassStorage
+SRC          = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S Lib/SCSI.c Lib/VirtualFAT.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)
+LD_FLAGS     = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)
+
+# Flash size and bootloader section sizes of the target, in KB. These must
+# match the target's total FLASH size and the bootloader size set in the
+# device's fuses.
+FLASH_SIZE_KB         = 128
+BOOT_SECTION_SIZE_KB  = 8
+
+# Bootloader address calculation formulas
+# Do not modify these macros, but rather modify the dependent values above.
+CALC_ADDRESS_IN_HEX   = $(shell printf "0x%X" $$(( $(1) )) )
+BOOT_START_OFFSET     = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
+BOOT_SEC_OFFSET       = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )
+
+# Bootloader linker section flags for relocating the API table sections to
+# known FLASH addresses - these should not normally be user-edited.
+BOOT_SECTION_LD_FLAG  = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))
+BOOT_API_LD_FLAGS     = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)
+BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable,   BootloaderAPI_JumpTable,   32)
+BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures,  BootloaderAPI_Signatures,  8)
+
+# Check if the bootloader needs an AUX section, located before the real bootloader section to store some of the
+# bootloader code. This is required for 32KB and smaller devices, where the actual bootloader is 6KB but the maximum
+# bootloader section size is 4KB. The actual usable application space will be reduced by 6KB for these devices.
+ifeq ($(BOOT_SECTION_SIZE_KB),8)
+  CC_FLAGS           += -DAUX_BOOT_SECTION_SIZE=0
+else
+  AUX_BOOT_SECTION_SIZE_KB = (6 - $(BOOT_SECTION_SIZE_KB))
+
+  CC_FLAGS           += -DAUX_BOOT_SECTION_SIZE='($(AUX_BOOT_SECTION_SIZE_KB) * 1024)'
+  LD_FLAGS           += -Wl,--section-start=.boot_aux=$(call BOOT_SEC_OFFSET, (($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024 - 16))
+  LD_FLAGS           += $(call BOOT_SECTION_LD_FLAG, .boot_aux_trampoline, Boot_AUX_Trampoline, ($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024)
+endif
+
+# Default target
+all:
+
+# Include LUFA build script makefiles
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/BootloaderAPITable.S b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/BootloaderAPITable.S
index ec499b74e5..88c51da825 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/BootloaderAPITable.S
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/BootloaderAPITable.S
@@ -1,91 +1,91 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2014.

-

-  dean [at] fourwalledcubicle [dot] com

-           www.lufa-lib.org

-*/

-

-/*

-  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting

-  documentation, and that the name of the author not be used in

-  advertising or publicity pertaining to distribution of the

-  software without specific, written prior permission.

-

-  The author disclaims all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-; Trampolines to actual API implementations if the target address is outside the

-; range of a rjmp instruction (can happen with large bootloader sections)

-.section .apitable_trampolines, "ax"

-.global BootloaderAPI_Trampolines

-BootloaderAPI_Trampolines:

-

-	BootloaderAPI_ErasePage_Trampoline:

-		jmp BootloaderAPI_ErasePage

-	BootloaderAPI_WritePage_Trampoline:

-		jmp BootloaderAPI_WritePage

-	BootloaderAPI_FillWord_Trampoline:

-		jmp BootloaderAPI_FillWord

-	BootloaderAPI_ReadSignature_Trampoline:

-		jmp BootloaderAPI_ReadSignature

-	BootloaderAPI_ReadFuse_Trampoline:

-		jmp BootloaderAPI_ReadFuse

-	BootloaderAPI_ReadLock_Trampoline:

-		jmp BootloaderAPI_ReadLock

-	BootloaderAPI_WriteLock_Trampoline:

-		jmp BootloaderAPI_WriteLock

-	BootloaderAPI_UNUSED1:

-		ret

-	BootloaderAPI_UNUSED2:

-		ret

-	BootloaderAPI_UNUSED3:

-		ret

-	BootloaderAPI_UNUSED4:

-		ret

-	BootloaderAPI_UNUSED5:

-		ret

-

-

-

-; API function jump table

-.section .apitable_jumptable, "ax"

-.global BootloaderAPI_JumpTable

-BootloaderAPI_JumpTable:

-

-	rjmp BootloaderAPI_ErasePage_Trampoline

-	rjmp BootloaderAPI_WritePage_Trampoline

-	rjmp BootloaderAPI_FillWord_Trampoline

-	rjmp BootloaderAPI_ReadSignature_Trampoline

-	rjmp BootloaderAPI_ReadFuse_Trampoline

-	rjmp BootloaderAPI_ReadLock_Trampoline

-	rjmp BootloaderAPI_WriteLock_Trampoline

-	rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1

-	rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2

-	rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3

-	rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4

-	rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5

-

-

-

-; Bootloader table signatures and information

-.section .apitable_signatures, "ax"

-.global BootloaderAPI_Signatures

-BootloaderAPI_Signatures:

-

-	.long BOOT_START_ADDR ; Start address of the bootloader

-	.word 0xDF20 ; Signature for the Printer class bootloader

-	.word 0xDCFB ; Signature for a LUFA class bootloader

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2014.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2014  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaims all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+; Trampolines to actual API implementations if the target address is outside the
+; range of a rjmp instruction (can happen with large bootloader sections)
+.section .apitable_trampolines, "ax"
+.global BootloaderAPI_Trampolines
+BootloaderAPI_Trampolines:
+
+	BootloaderAPI_ErasePage_Trampoline:
+		jmp BootloaderAPI_ErasePage
+	BootloaderAPI_WritePage_Trampoline:
+		jmp BootloaderAPI_WritePage
+	BootloaderAPI_FillWord_Trampoline:
+		jmp BootloaderAPI_FillWord
+	BootloaderAPI_ReadSignature_Trampoline:
+		jmp BootloaderAPI_ReadSignature
+	BootloaderAPI_ReadFuse_Trampoline:
+		jmp BootloaderAPI_ReadFuse
+	BootloaderAPI_ReadLock_Trampoline:
+		jmp BootloaderAPI_ReadLock
+	BootloaderAPI_WriteLock_Trampoline:
+		jmp BootloaderAPI_WriteLock
+	BootloaderAPI_UNUSED1:
+		ret
+	BootloaderAPI_UNUSED2:
+		ret
+	BootloaderAPI_UNUSED3:
+		ret
+	BootloaderAPI_UNUSED4:
+		ret
+	BootloaderAPI_UNUSED5:
+		ret
+
+
+
+; API function jump table
+.section .apitable_jumptable, "ax"
+.global BootloaderAPI_JumpTable
+BootloaderAPI_JumpTable:
+
+	rjmp BootloaderAPI_ErasePage_Trampoline
+	rjmp BootloaderAPI_WritePage_Trampoline
+	rjmp BootloaderAPI_FillWord_Trampoline
+	rjmp BootloaderAPI_ReadSignature_Trampoline
+	rjmp BootloaderAPI_ReadFuse_Trampoline
+	rjmp BootloaderAPI_ReadLock_Trampoline
+	rjmp BootloaderAPI_WriteLock_Trampoline
+	rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1
+	rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2
+	rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3
+	rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4
+	rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5
+
+
+
+; Bootloader table signatures and information
+.section .apitable_signatures, "ax"
+.global BootloaderAPI_Signatures
+BootloaderAPI_Signatures:
+
+	.long BOOT_START_ADDR ; Start address of the bootloader
+	.word 0xDF20 ; Signature for the Printer class bootloader
+	.word 0xDCFB ; Signature for a LUFA class bootloader
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/asf.xml b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/asf.xml
index 86a56911ed..b5c0c6b3a5 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/asf.xml
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/asf.xml
@@ -1,159 +1,159 @@
-<asf xmlversion="1.0">

-	<project caption="Printer Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.128_4" force-caption="true" workspace-name="lufa_printer_128kb_4kb_">

-		<require idref="lufa.bootloaders.printer"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb1287"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="Printer Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.64_4" force-caption="true" workspace-name="lufa_printer_64kb_4kb_">

-		<require idref="lufa.bootloaders.printer"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="at90usb647"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="Printer Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.32_4" force-caption="true" workspace-name="lufa_printer_32kb_4kb_">

-		<require idref="lufa.bootloaders.printer"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega32u4"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="Printer Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.16_4" force-caption="true" workspace-name="lufa_printer_16kb_4kb_">

-		<require idref="lufa.bootloaders.printer"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega16u2"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<project caption="Printer Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.8_4" force-caption="true" workspace-name="lufa_printer_8kb_4kb_">

-		<require idref="lufa.bootloaders.printer"/>

-		<require idref="lufa.boards.dummy.avr8"/>

-		<generator value="as5_8"/>

-

-		<device-support value="atmega8u2"/>

-		<config name="lufa.drivers.board.name" value="none"/>

-

-		<config name="config.compiler.optimization.level" value="size"/>

-

-		<build type="define" name="F_CPU" value="16000000UL"/>

-		<build type="define" name="F_USB" value="16000000UL"/>

-

-		<build type="define" name="BOOT_START_ADDR" value="0x1000"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>

-

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>

-		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>

-		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>

-	</project>

-

-	<module type="application" id="lufa.bootloaders.printer" caption="Printer Bootloader">

-		<info type="description" value="summary">

-		Printer Class Bootloader, capable of reprogramming a device by "printing" new HEX files to the virtual Plain-Text printer it creates when plugged into a host.

-		</info>

-

- 		<info type="gui-flag" value="move-to-root"/>

-

-		<info type="keyword" value="Technology">

-			<keyword value="Bootloaders"/>

-			<keyword value="USB Device"/>

-		</info>

-

-		<device-support-alias value="lufa_avr8"/>

-		<device-support-alias value="lufa_xmega"/>

-		<device-support-alias value="lufa_uc3"/>

-

-		<build type="include-path" value="."/>

-		<build type="c-source" value="BootloaderPrinter.c"/>

-		<build type="header-file" value="BootloaderPrinter.h"/>

-		<build type="c-source" value="Descriptors.c"/>

-		<build type="header-file" value="Descriptors.h"/>

-		<build type="c-source" value="BootloaderAPI.c"/>

-		<build type="header-file" value="BootloaderAPI.h"/>

-		<build type="asm-source" value="BootloaderAPITable.S"/>

-

-		<build type="module-config" subtype="path" value="Config"/>

-		<build type="header-file" value="Config/LUFAConfig.h"/>

-

-		<build type="distribute" subtype="user-file" value="doxyfile"/>

-		<build type="distribute" subtype="user-file" value="BootloaderPrinter.txt"/>

-

-		<require idref="lufa.common"/>

-		<require idref="lufa.platform"/>

-		<require idref="lufa.drivers.usb"/>

-		<require idref="lufa.drivers.board"/>

-		<require idref="lufa.drivers.board.leds"/>

-	</module>

-</asf>

+<asf xmlversion="1.0">
+	<project caption="Printer Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.128_4" force-caption="true" workspace-name="lufa_printer_128kb_4kb_">
+		<require idref="lufa.bootloaders.printer"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb1287"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x1F000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="Printer Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.64_4" force-caption="true" workspace-name="lufa_printer_64kb_4kb_">
+		<require idref="lufa.bootloaders.printer"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="at90usb647"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0xF000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="Printer Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.32_4" force-caption="true" workspace-name="lufa_printer_32kb_4kb_">
+		<require idref="lufa.bootloaders.printer"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega32u4"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x7000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="Printer Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.16_4" force-caption="true" workspace-name="lufa_printer_16kb_4kb_">
+		<require idref="lufa.bootloaders.printer"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega16u2"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x3000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<project caption="Printer Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.8_4" force-caption="true" workspace-name="lufa_printer_8kb_4kb_">
+		<require idref="lufa.bootloaders.printer"/>
+		<require idref="lufa.boards.dummy.avr8"/>
+		<generator value="as5_8"/>
+
+		<device-support value="atmega8u2"/>
+		<config name="lufa.drivers.board.name" value="none"/>
+
+		<config name="config.compiler.optimization.level" value="size"/>
+
+		<build type="define" name="F_CPU" value="16000000UL"/>
+		<build type="define" name="F_USB" value="16000000UL"/>
+
+		<build type="define" name="BOOT_START_ADDR" value="0x1000"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/>
+
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/>
+		<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/>
+		<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/>
+	</project>
+
+	<module type="application" id="lufa.bootloaders.printer" caption="Printer Bootloader">
+		<info type="description" value="summary">
+		Printer Class Bootloader, capable of reprogramming a device by "printing" new HEX files to the virtual Plain-Text printer it creates when plugged into a host.
+		</info>
+
+ 		<info type="gui-flag" value="move-to-root"/>
+
+		<info type="keyword" value="Technology">
+			<keyword value="Bootloaders"/>
+			<keyword value="USB Device"/>
+		</info>
+
+		<device-support-alias value="lufa_avr8"/>
+		<device-support-alias value="lufa_xmega"/>
+		<device-support-alias value="lufa_uc3"/>
+
+		<build type="include-path" value="."/>
+		<build type="c-source" value="BootloaderPrinter.c"/>
+		<build type="header-file" value="BootloaderPrinter.h"/>
+		<build type="c-source" value="Descriptors.c"/>
+		<build type="header-file" value="Descriptors.h"/>
+		<build type="c-source" value="BootloaderAPI.c"/>
+		<build type="header-file" value="BootloaderAPI.h"/>
+		<build type="asm-source" value="BootloaderAPITable.S"/>
+
+		<build type="module-config" subtype="path" value="Config"/>
+		<build type="header-file" value="Config/LUFAConfig.h"/>
+
+		<build type="distribute" subtype="user-file" value="doxyfile"/>
+		<build type="distribute" subtype="user-file" value="BootloaderPrinter.txt"/>
+
+		<require idref="lufa.common"/>
+		<require idref="lufa.platform"/>
+		<require idref="lufa.drivers.usb"/>
+		<require idref="lufa.drivers.board"/>
+		<require idref="lufa.drivers.board.leds"/>
+	</module>
+</asf>
diff --git a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/makefile b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/makefile
index 0716c3bbe8..0db035de3b 100644
--- a/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/makefile
+++ b/tmk_core/protocol/lufa/LUFA-git/Bootloaders/Printer/makefile
@@ -1,55 +1,55 @@
-#

-#             LUFA Library

-#     Copyright (C) Dean Camera, 2014.

-#

-#  dean [at] fourwalledcubicle [dot] com

-#           www.lufa-lib.org

-#

-# --------------------------------------

-#         LUFA Project Makefile.

-# --------------------------------------

-

-# Run "make help" for target help.

-

-MCU          = at90usb1287

-ARCH         = AVR8

-BOARD        = USBKEY

-F_CPU        = 8000000

-F_USB        = $(F_CPU)

-OPTIMIZATION = s

-TARGET       = BootloaderPrinter

-SRC          = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)

-LUFA_PATH    = ../../LUFA

-CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)

-LD_FLAGS     = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)

-

-# Flash size and bootloader section sizes of the target, in KB. These must

-# match the target's total FLASH size and the bootloader size set in the

-# device's fuses.

-FLASH_SIZE_KB         = 128

-BOOT_SECTION_SIZE_KB  = 8

-

-# Bootloader address calculation formulas

-# Do not modify these macros, but rather modify the dependent values above.

-CALC_ADDRESS_IN_HEX   = $(shell printf "0x%X" $$(( $(1) )) )

-BOOT_START_OFFSET     = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )

-BOOT_SEC_OFFSET       = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )

-

-# Bootloader linker section flags for relocating the API table sections to

-# known FLASH addresses - these should not normally be user-edited.

-BOOT_SECTION_LD_FLAG  = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))

-BOOT_API_LD_FLAGS     = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)

-BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable,   BootloaderAPI_JumpTable,   32)

-BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures,  BootloaderAPI_Signatures,  8)

-

-# Default target

-all:

-

-# Include LUFA build script makefiles

-include $(LUFA_PATH)/Build/lufa_core.mk

-include $(LUFA_PATH)/Build/lufa_sources.mk

-include $(LUFA_PATH)/Build/lufa_build.mk

-include $(LUFA_PATH)/Build/lufa_cppcheck.mk

-include $(LUFA_PATH)/Build/lufa_doxygen.mk

-include $(LUFA_PATH)/Build/lufa_avrdude.mk

-include $(LUFA_PATH)/Build/lufa_atprogram.mk

+#
+#             LUFA Library
+#     Copyright (C) Dean Camera, 2014.
+#
+#  dean [at] fourwalledcubicle [dot] com
+#           www.lufa-lib.org
+#
+# --------------------------------------
+#         LUFA Project Makefile.
+# --------------------------------------
+
+# Run "make help" for target help.
+
+MCU          = at90usb1287
+ARCH         = AVR8
+BOARD        = USBKEY
+F_CPU        = 8000000
+F_USB        = $(F_CPU)
+OPTIMIZATION = s
+TARGET       = BootloaderPrinter
+SRC          = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS)
+LUFA_PATH    = ../../LUFA
+CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET)
+LD_FLAGS     = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS)
+
+# Flash size and bootloader section sizes of the target, in KB. These must
+# match the target's total FLASH size and the bootloader size set in the
+# device's fuses.
+FLASH_SIZE_KB         = 128
+BOOT_SECTION_SIZE_KB  = 8
+
+# Bootloader address calculation formulas
+# Do not modify these macros, but rather modify the dependent values above.
+CALC_ADDRESS_IN_HEX   = $(shell printf "0x%X" $$(( $(1) )) )
+BOOT_START_OFFSET     = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
+BOOT_SEC_OFFSET       = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )
+
+# Bootloader linker section flags for relocating the API table sections to
+# known FLASH addresses - these should not normally be user-edited.
+BOOT_SECTION_LD_FLAG  = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2))
+BOOT_API_LD_FLAGS     = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96)
+BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable,   BootloaderAPI_JumpTable,   32)
+BOOT_API_LD_FLAGS    += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures,  BootloaderAPI_Signatures,  8)
+
+# Default target
+all:
+
+# Include LUFA build script makefiles
+include $(LUFA_PATH)/Build/lufa_core.mk
+include $(LUFA_PATH)/Build/lufa_sources.mk
+include $(LUFA_PATH)/Build/lufa_build.mk
+include $(LUFA_PATH)/Build/lufa_cppcheck.mk
+include $(LUFA_PATH)/Build/lufa_doxygen.mk
+include $(LUFA_PATH)/Build/lufa_avrdude.mk
+include $(LUFA_PATH)/Build/lufa_atprogram.mk