Add support for Starry FRL (#24626)

Co-authored-by: jack <jack@pngu.org>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>

1 files changed, 29 insertions, 0 deletions

diff --git a/keyboards/salane/starryfrl/readme.md b/keyboards/salane/starryfrl/readme.md
new file mode 100644
index 0000000000..da2920797d
--- /dev/null
+++ b/keyboards/salane/starryfrl/readme.md
@@ -0,0 +1,29 @@
+# Starry FRL
+
+![Starry FRL](https://i.imgur.com/eRYlEe7.jpeg)
+
+ This firmware support for both Solder and Hotswap PCB of Starry FRL
+
+ **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `uf2` appropriate for your board.
+
+* Keyboard Maintainer: [Mai The San](https://github.com/MaiTheSan) 
+* Hardware Supported: Starry FRL 
+* Hardware Availability: [Waifu.works Discord](https://discord.gg/waifuworks)
+
+Make examples for this keyboard (after setting up your build environment):
+
+    make salane/starryfrl:default
+
+Flashing example for this keyboard:
+
+    make salane/starryfrl:default:flash
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Press the key `BOOT` in the back of PCB and plug in keyboard
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file