From b0069c5c05dac2c910d51ef7f3bf4133721a9c49 Mon Sep 17 00:00:00 2001 From: Zach White Date: Sun, 7 Mar 2021 19:10:03 -0800 Subject: Begin the process of deprecating bin/qmk in favor of the global cli (#12109) * Begin the process of deprecating bin/qmk in favor of the global cli * Correctly set the qmk bin --- lib/python/qmk/commands.py | 1 + lib/python/qmk/tests/test_cli_commands.py | 4 ++-- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'lib/python') diff --git a/lib/python/qmk/commands.py b/lib/python/qmk/commands.py index 3c6f0d001d..233d1034b4 100644 --- a/lib/python/qmk/commands.py +++ b/lib/python/qmk/commands.py @@ -180,6 +180,7 @@ def compile_configurator_json(user_keymap, bootloader=None, parallel=1, **env_va f'VERBOSE={verbose}', f'COLOR={color}', 'SILENT=false', + 'QMK_BIN=qmk', ]) return make_command diff --git a/lib/python/qmk/tests/test_cli_commands.py b/lib/python/qmk/tests/test_cli_commands.py index 82c42a20e8..bfecebdd78 100644 --- a/lib/python/qmk/tests/test_cli_commands.py +++ b/lib/python/qmk/tests/test_cli_commands.py @@ -8,7 +8,7 @@ is_windows = 'windows' in platform.platform().lower() def check_subcommand(command, *args): - cmd = ['bin/qmk', command, *args] + cmd = ['qmk', command, *args] result = run(cmd, stdout=PIPE, stderr=STDOUT, universal_newlines=True) return result @@ -17,7 +17,7 @@ def check_subcommand_stdin(file_to_read, command, *args): """Pipe content of a file to a command and return output. """ with open(file_to_read, encoding='utf-8') as my_file: - cmd = ['bin/qmk', command, *args] + cmd = ['qmk', command, *args] result = run(cmd, stdin=my_file, stdout=PIPE, stderr=STDOUT, universal_newlines=True) return result -- cgit v1.2.3 From 1d341ffbb0dfbf45139c103123549c3c0fec816e Mon Sep 17 00:00:00 2001 From: Michael Stapelberg Date: Tue, 16 Mar 2021 20:45:21 +0100 Subject: core: add support for MK66F18 (Teensy 3.6) micro controller (#12258) This is in preparation for https://github.com/qmk/qmk_firmware/pull/10171 --- data/schemas/keyboard.jsonschema | 2 +- lib/python/qmk/constants.py | 2 +- quantum/mcu_selection.mk | 27 +++++++++++++++++++++++++++ tmk_core/common/chibios/bootloader.c | 2 +- tmk_core/common/chibios/chibios_config.h | 4 ++++ 5 files changed, 34 insertions(+), 3 deletions(-) (limited to 'lib/python') diff --git a/data/schemas/keyboard.jsonschema b/data/schemas/keyboard.jsonschema index ec03a8828b..3034242fd9 100644 --- a/data/schemas/keyboard.jsonschema +++ b/data/schemas/keyboard.jsonschema @@ -25,7 +25,7 @@ }, "processor": { "type": "string", - "enum": ["cortex-m0", "cortex-m0plus", "cortex-m3", "cortex-m4", "MKL26Z64", "MK20DX128", "MK20DX256", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F411", "STM32G431", "STM32G474", "atmega16u2", "atmega32u2", "atmega16u4", "atmega32u4", "at90usb162", "at90usb646", "at90usb647", "at90usb1286", "at90usb1287", "atmega32a", "atmega328p", "atmega328", "attiny85", "unknown"] + "enum": ["cortex-m0", "cortex-m0plus", "cortex-m3", "cortex-m4", "MKL26Z64", "MK20DX128", "MK20DX256", "MK66F18", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F411", "STM32G431", "STM32G474", "atmega16u2", "atmega32u2", "atmega16u4", "atmega32u4", "at90usb162", "at90usb646", "at90usb647", "at90usb1286", "at90usb1287", "atmega32a", "atmega328p", "atmega328", "attiny85", "unknown"] }, "board": { "type": "string", diff --git a/lib/python/qmk/constants.py b/lib/python/qmk/constants.py index 3ed69f3bf9..b5cdaf6a60 100644 --- a/lib/python/qmk/constants.py +++ b/lib/python/qmk/constants.py @@ -10,7 +10,7 @@ QMK_FIRMWARE = Path.cwd() MAX_KEYBOARD_SUBFOLDERS = 5 # Supported processor types -CHIBIOS_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F411', 'STM32G431', 'STM32G474' +CHIBIOS_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'MK66F18', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F411', 'STM32G431', 'STM32G474' LUFA_PROCESSORS = 'at90usb162', 'atmega16u2', 'atmega32u2', 'atmega16u4', 'atmega32u4', 'at90usb646', 'at90usb647', 'at90usb1286', 'at90usb1287', None VUSB_PROCESSORS = 'atmega32a', 'atmega328p', 'atmega328', 'attiny85' diff --git a/quantum/mcu_selection.mk b/quantum/mcu_selection.mk index f7329fc4d9..53e03a8054 100644 --- a/quantum/mcu_selection.mk +++ b/quantum/mcu_selection.mk @@ -81,6 +81,33 @@ ifneq ($(findstring MK20DX256, $(MCU)),) BOARD ?= PJRC_TEENSY_3_1 endif +ifneq ($(findstring MK66F18, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = KINETIS + MCU_SERIES = MK66F18 + + # Linker script to use + # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # or /ld/ + MCU_LDSCRIPT ?= MK66FX1M0 + + # Startup code to use + # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= MK66F18 + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= PJRC_TEENSY_3_6 +endif + ifneq ($(findstring STM32F042, $(MCU)),) # Cortex version MCU = cortex-m0 diff --git a/tmk_core/common/chibios/bootloader.c b/tmk_core/common/chibios/bootloader.c index 6cabcc4b81..4a175a6283 100644 --- a/tmk_core/common/chibios/bootloader.c +++ b/tmk_core/common/chibios/bootloader.c @@ -79,7 +79,7 @@ void enter_bootloader_mode_if_requested(void) { } } -#elif defined(KL2x) || defined(K20x) // STM32_BOOTLOADER_DUAL_BANK // STM32_BOOTLOADER_ADDRESS +#elif defined(KL2x) || defined(K20x) || defined(MK66F18) // STM32_BOOTLOADER_DUAL_BANK // STM32_BOOTLOADER_ADDRESS /* Kinetis */ # if defined(BOOTLOADER_KIIBOHD) diff --git a/tmk_core/common/chibios/chibios_config.h b/tmk_core/common/chibios/chibios_config.h index 9a66ac3174..1d8ace4955 100644 --- a/tmk_core/common/chibios/chibios_config.h +++ b/tmk_core/common/chibios/chibios_config.h @@ -32,3 +32,7 @@ # define USE_GPIOV1 # define STM32_SYSCLK KINETIS_SYSCLK_FREQUENCY #endif + +#if defined(MK66F18) +# define STM32_SYSCLK KINETIS_SYSCLK_FREQUENCY +#endif -- cgit v1.2.3 From f2715a05939b749771d9826f9ad23b4cab280e82 Mon Sep 17 00:00:00 2001 From: Zach White Date: Thu, 18 Mar 2021 16:10:40 -0700 Subject: Consistently use bin/qmk when that script is called (#12286) * Pass QMK_BIN down to build_keyboard.mk * choose the correct qmk script --- Makefile | 4 ++-- bin/qmk | 1 + lib/python/qmk/commands.py | 2 +- 3 files changed, 4 insertions(+), 3 deletions(-) (limited to 'lib/python') diff --git a/Makefile b/Makefile index de0a2d4153..80e1a90a19 100644 --- a/Makefile +++ b/Makefile @@ -30,7 +30,7 @@ endif endif # Determine which qmk cli to use -ifeq (, $(shell which qmk)) +ifeq (,$(shell which qmk)) QMK_BIN = bin/qmk else QMK_BIN = qmk @@ -391,7 +391,7 @@ define PARSE_KEYMAP # Format it in bold KB_SP := $(BOLD)$$(KB_SP)$(NO_COLOR) # Specify the variables that we are passing forward to submake - MAKE_VARS := KEYBOARD=$$(CURRENT_KB) KEYMAP=$$(CURRENT_KM) REQUIRE_PLATFORM_KEY=$$(REQUIRE_PLATFORM_KEY) + MAKE_VARS := KEYBOARD=$$(CURRENT_KB) KEYMAP=$$(CURRENT_KM) REQUIRE_PLATFORM_KEY=$$(REQUIRE_PLATFORM_KEY) QMK_BIN=$$(QMK_BIN) # And the first part of the make command MAKE_CMD := $$(MAKE) -r -R -C $(ROOT_DIR) -f build_keyboard.mk $$(MAKE_TARGET) # The message to display diff --git a/bin/qmk b/bin/qmk index 28486026f9..a2af2951c9 100755 --- a/bin/qmk +++ b/bin/qmk @@ -73,6 +73,7 @@ def main(): """ # Change to the root of our checkout os.environ['ORIG_CWD'] = os.getcwd() + os.environ['DEPRECATED_BIN_QMK'] = '1' os.chdir(qmk_dir) print('Warning: The bin/qmk script is being deprecated. Please install the QMK CLI: python3 -m pip install qmk', file=sys.stderr) diff --git a/lib/python/qmk/commands.py b/lib/python/qmk/commands.py index ac98376958..4809365af3 100644 --- a/lib/python/qmk/commands.py +++ b/lib/python/qmk/commands.py @@ -180,7 +180,7 @@ def compile_configurator_json(user_keymap, bootloader=None, parallel=1, **env_va f'VERBOSE={verbose}', f'COLOR={color}', 'SILENT=false', - 'QMK_BIN=qmk', + f'QMK_BIN={"bin/qmk" if "DEPRECATED_BIN_QMK" in os.environ else "qmk"}', ]) return make_command -- cgit v1.2.3 From 3f7350732c9722b87ea52eee740e587a70b8fb38 Mon Sep 17 00:00:00 2001 From: Purdea Andrei Date: Sun, 25 Apr 2021 11:59:25 +0300 Subject: Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h Co-authored-by: Nick Brassel * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. Co-authored-by: Nick Brassel --- data/schemas/keyboard.jsonschema | 2 +- docs/compatible_microcontrollers.md | 1 + docs/ja/compatible_microcontrollers.md | 1 + lib/python/qmk/constants.py | 2 +- .../chibios/GENERIC_STM32_F446XE/board/board.mk | 9 + .../chibios/GENERIC_STM32_F446XE/configs/board.h | 24 ++ .../chibios/GENERIC_STM32_F446XE/configs/config.h | 23 ++ .../chibios/GENERIC_STM32_F446XE/configs/mcuconf.h | 361 +++++++++++++++++++++ quantum/mcu_selection.mk | 34 ++ 9 files changed, 455 insertions(+), 2 deletions(-) create mode 100644 platforms/chibios/GENERIC_STM32_F446XE/board/board.mk create mode 100644 platforms/chibios/GENERIC_STM32_F446XE/configs/board.h create mode 100644 platforms/chibios/GENERIC_STM32_F446XE/configs/config.h create mode 100644 platforms/chibios/GENERIC_STM32_F446XE/configs/mcuconf.h (limited to 'lib/python') diff --git a/data/schemas/keyboard.jsonschema b/data/schemas/keyboard.jsonschema index 276f66413e..99121d79ec 100644 --- a/data/schemas/keyboard.jsonschema +++ b/data/schemas/keyboard.jsonschema @@ -25,7 +25,7 @@ }, "processor": { "type": "string", - "enum": ["cortex-m0", "cortex-m0plus", "cortex-m3", "cortex-m4", "MKL26Z64", "MK20DX128", "MK20DX256", "MK66F18", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F411", "STM32G431", "STM32G474", "atmega16u2", "atmega32u2", "atmega16u4", "atmega32u4", "at90usb162", "at90usb646", "at90usb647", "at90usb1286", "at90usb1287", "atmega32a", "atmega328p", "atmega328", "attiny85", "unknown"] + "enum": ["cortex-m0", "cortex-m0plus", "cortex-m3", "cortex-m4", "MKL26Z64", "MK20DX128", "MK20DX256", "MK66F18", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F411", "STM32F446", "STM32G431", "STM32G474", "atmega16u2", "atmega32u2", "atmega16u4", "atmega32u4", "at90usb162", "at90usb646", "at90usb647", "at90usb1286", "at90usb1287", "atmega32a", "atmega328p", "atmega328", "attiny85", "unknown"] }, "board": { "type": "string", diff --git a/docs/compatible_microcontrollers.md b/docs/compatible_microcontrollers.md index 47a4844e7f..5e16ab2770 100644 --- a/docs/compatible_microcontrollers.md +++ b/docs/compatible_microcontrollers.md @@ -28,6 +28,7 @@ You can also use any ARM chip with USB that [ChibiOS](https://www.chibios.org) s * [STM32F303](https://www.st.com/en/microcontrollers-microprocessors/stm32f303.html) * [STM32F401](https://www.st.com/en/microcontrollers-microprocessors/stm32f401.html) * [STM32F411](https://www.st.com/en/microcontrollers-microprocessors/stm32f411.html) + * [STM32F446](https://www.st.com/en/microcontrollers-microprocessors/stm32f446.html) * [STM32G431](https://www.st.com/en/microcontrollers-microprocessors/stm32g4x1.html) * [STM32G474](https://www.st.com/en/microcontrollers-microprocessors/stm32g4x4.html) diff --git a/docs/ja/compatible_microcontrollers.md b/docs/ja/compatible_microcontrollers.md index fdd11f14fa..69da70f2c3 100644 --- a/docs/ja/compatible_microcontrollers.md +++ b/docs/ja/compatible_microcontrollers.md @@ -33,6 +33,7 @@ QMK は十分な容量のフラッシュメモリを備えた USB 対応 AVR ま * [STM32F303](https://www.st.com/en/microcontrollers-microprocessors/stm32f303.html) * [STM32F401](https://www.st.com/en/microcontrollers-microprocessors/stm32f401.html) * [STM32F411](https://www.st.com/en/microcontrollers-microprocessors/stm32f411.html) +* [STM32F446](https://www.st.com/en/microcontrollers-microprocessors/stm32f446.html) * [STM32G431](https://www.st.com/en/microcontrollers-microprocessors/stm32g4x1.html) * [STM32G474](https://www.st.com/en/microcontrollers-microprocessors/stm32g4x4.html) diff --git a/lib/python/qmk/constants.py b/lib/python/qmk/constants.py index b5cdaf6a60..33adb0a13e 100644 --- a/lib/python/qmk/constants.py +++ b/lib/python/qmk/constants.py @@ -10,7 +10,7 @@ QMK_FIRMWARE = Path.cwd() MAX_KEYBOARD_SUBFOLDERS = 5 # Supported processor types -CHIBIOS_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'MK66F18', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F411', 'STM32G431', 'STM32G474' +CHIBIOS_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'MK66F18', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F411', 'STM32F446', 'STM32G431', 'STM32G474' LUFA_PROCESSORS = 'at90usb162', 'atmega16u2', 'atmega32u2', 'atmega16u4', 'atmega32u4', 'at90usb646', 'at90usb647', 'at90usb1286', 'at90usb1287', None VUSB_PROCESSORS = 'atmega32a', 'atmega328p', 'atmega328', 'attiny85' diff --git a/platforms/chibios/GENERIC_STM32_F446XE/board/board.mk b/platforms/chibios/GENERIC_STM32_F446XE/board/board.mk new file mode 100644 index 0000000000..57897941ca --- /dev/null +++ b/platforms/chibios/GENERIC_STM32_F446XE/board/board.mk @@ -0,0 +1,9 @@ +# List of all the board related files. +BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_F446RE/board.c + +# Required include directories +BOARDINC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO64_F446RE + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) diff --git a/platforms/chibios/GENERIC_STM32_F446XE/configs/board.h b/platforms/chibios/GENERIC_STM32_F446XE/configs/board.h new file mode 100644 index 0000000000..80dfcffa99 --- /dev/null +++ b/platforms/chibios/GENERIC_STM32_F446XE/configs/board.h @@ -0,0 +1,24 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#define STM32_HSECLK 16000000 +// The following is required to disable the pull-down on PA9, when PA9 is used for the keyboard matrix: +#define BOARD_OTG_NOVBUSSENS + +#include_next "board.h" + +#undef STM32_HSE_BYPASS diff --git a/platforms/chibios/GENERIC_STM32_F446XE/configs/config.h b/platforms/chibios/GENERIC_STM32_F446XE/configs/config.h new file mode 100644 index 0000000000..cc52a953ed --- /dev/null +++ b/platforms/chibios/GENERIC_STM32_F446XE/configs/config.h @@ -0,0 +1,23 @@ +/* Copyright 2021 Andrei Purdea + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* Address for jumping to bootloader on STM32 chips. */ +/* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606. + */ +#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000 +#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP +# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE +#endif diff --git a/platforms/chibios/GENERIC_STM32_F446XE/configs/mcuconf.h b/platforms/chibios/GENERIC_STM32_F446XE/configs/mcuconf.h new file mode 100644 index 0000000000..d2de75590e --- /dev/null +++ b/platforms/chibios/GENERIC_STM32_F446XE/configs/mcuconf.h @@ -0,0 +1,361 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED FALSE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 8 +#define STM32_PLLN_VALUE 180 +#define STM32_PLLP_VALUE 2 +#define STM32_PLLQ_VALUE 7 +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SM_VALUE 8 +#define STM32_PLLI2SR_VALUE 4 +#define STM32_PLLI2SP_VALUE 4 +#define STM32_PLLI2SQ_VALUE 4 +#define STM32_PLLSAIN_VALUE 192 +#define STM32_PLLSAIM_VALUE 8 +#define STM32_PLLSAIP_VALUE 8 +#define STM32_PLLSAIQ_VALUE 4 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSE +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_PLLI2S +#define STM32_MCO2PRE STM32_MCO2PRE_DIV1 +#define STM32_I2SSRC STM32_I2SSRC_PLLI2S +#define STM32_SAI1SEL STM32_SAI2SEL_PLLR +#define STM32_SAI2SEL STM32_SAI2SEL_PLLR +#define STM32_CK48MSEL STM32_CK48MSEL_PLLALT +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 15 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI21_PRIORITY 15 +#define STM32_IRQ_EXTI22_PRIORITY 15 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_USE_CAN2 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#define STM32_CAN_CAN2_IRQ_PRIORITY 11 + +/* + * DAC driver system settings. + */ +#define STM32_DAC_DUAL_MODE FALSE +#define STM32_DAC_USE_DAC1_CH1 FALSE +#define STM32_DAC_USE_DAC1_CH2 FALSE +#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * I2S driver system settings. + */ +#define STM32_I2S_USE_SPI2 FALSE +#define STM32_I2S_USE_SPI3 FALSE +#define STM32_I2S_SPI2_IRQ_PRIORITY 10 +#define STM32_I2S_SPI3_IRQ_PRIORITY 10 +#define STM32_I2S_SPI2_DMA_PRIORITY 1 +#define STM32_I2S_SPI3_DMA_PRIORITY 1 +#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * MAC driver system settings. + */ +#define STM32_MAC_TRANSMIT_BUFFERS 2 +#define STM32_MAC_RECEIVE_BUFFERS 4 +#define STM32_MAC_BUFFERS_SIZE 1522 +#define STM32_MAC_PHY_TIMEOUT 100 +#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE +#define STM32_MAC_ETH1_IRQ_PRIORITY 13 +#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SDC driver system settings. + */ +#define STM32_SDC_SDIO_DMA_PRIORITY 3 +#define STM32_SDC_SDIO_IRQ_PRIORITY 9 +#define STM32_SDC_WRITE_TIMEOUT_MS 1000 +#define STM32_SDC_READ_TIMEOUT_MS 1000 +#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 +#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE +#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USE_UART7 FALSE +#define STM32_SERIAL_USE_UART8 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 +#define STM32_SERIAL_UART7_PRIORITY 12 +#define STM32_SERIAL_UART8_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_USE_SPI4 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI4_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI4_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI4_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_SPI4_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USE_UART4 FALSE +#define STM32_UART_USE_UART5 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_UART4_IRQ_PRIORITY 12 +#define STM32_UART_UART5_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_UART4_DMA_PRIORITY 0 +#define STM32_UART_UART5_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 TRUE +#define STM32_USB_USE_OTG2 FALSE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG2_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 +#define STM32_USB_OTG_THREAD_PRIO LOWPRIO +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#endif /* MCUCONF_H */ diff --git a/quantum/mcu_selection.mk b/quantum/mcu_selection.mk index 437d354fbe..edf44f5dcc 100644 --- a/quantum/mcu_selection.mk +++ b/quantum/mcu_selection.mk @@ -329,6 +329,40 @@ ifneq ($(findstring STM32F411, $(MCU)),) UF2_FAMILY ?= STM32F4 endif +ifneq ($(findstring STM32F446, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32F4xx + + # Linker script to use + # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # or /os/common/startup/ARMCMx/compilers/GCC/ld/ + # or /ld/ + MCU_LDSCRIPT ?= STM32F446xE + + # Startup code to use + # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32f4xx + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_F446XE + + USE_FPU ?= yes + + # Options to pass to dfu-util when flashing + DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave + DFU_SUFFIX_ARGS ?= -v 0483 -p DF11 +endif + ifneq ($(findstring STM32G431, $(MCU)),) # Cortex version MCU = cortex-m4 -- cgit v1.2.3 From 9cf82fae9566c68ea2ffcb120375868f27f94ecf Mon Sep 17 00:00:00 2001 From: Xelus22 <17491233+Xelus22@users.noreply.github.com> Date: Mon, 26 Apr 2021 03:07:15 +0000 Subject: Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers Co-authored-by: Nick Brassel * Include L443 in compatible microcontrollers Co-authored-by: Nick Brassel * Update config bootloader jump description Co-authored-by: Nick Brassel * Update ChibiOS define reasoning Co-authored-by: Nick Brassel * Update quantum/mcu_selection.mk Co-authored-by: Nick Brassel * fix git conflict Co-authored-by: Nick Brassel --- data/schemas/keyboard.jsonschema | 2 +- docs/compatible_microcontrollers.md | 2 + docs/ja/compatible_microcontrollers.md | 2 + lib/python/qmk/constants.py | 2 +- .../chibios/GENERIC_STM32_L433XC/board/board.mk | 9 + .../chibios/GENERIC_STM32_L433XC/configs/board.h | 24 ++ .../chibios/GENERIC_STM32_L433XC/configs/config.h | 26 ++ .../chibios/GENERIC_STM32_L433XC/configs/mcuconf.h | 292 +++++++++++++++++++++ quantum/mcu_selection.mk | 38 +++ 9 files changed, 395 insertions(+), 2 deletions(-) create mode 100644 platforms/chibios/GENERIC_STM32_L433XC/board/board.mk create mode 100644 platforms/chibios/GENERIC_STM32_L433XC/configs/board.h create mode 100644 platforms/chibios/GENERIC_STM32_L433XC/configs/config.h create mode 100644 platforms/chibios/GENERIC_STM32_L433XC/configs/mcuconf.h (limited to 'lib/python') diff --git a/data/schemas/keyboard.jsonschema b/data/schemas/keyboard.jsonschema index 99121d79ec..c335f49d52 100644 --- a/data/schemas/keyboard.jsonschema +++ b/data/schemas/keyboard.jsonschema @@ -25,7 +25,7 @@ }, "processor": { "type": "string", - "enum": ["cortex-m0", "cortex-m0plus", "cortex-m3", "cortex-m4", "MKL26Z64", "MK20DX128", "MK20DX256", "MK66F18", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F411", "STM32F446", "STM32G431", "STM32G474", "atmega16u2", "atmega32u2", "atmega16u4", "atmega32u4", "at90usb162", "at90usb646", "at90usb647", "at90usb1286", "at90usb1287", "atmega32a", "atmega328p", "atmega328", "attiny85", "unknown"] + "enum": ["cortex-m0", "cortex-m0plus", "cortex-m3", "cortex-m4", "MKL26Z64", "MK20DX128", "MK20DX256", "MK66F18", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F411", "STM32F446", "STM32G431", "STM32G474", "STM32L433", "STM32L443", "atmega16u2", "atmega32u2", "atmega16u4", "atmega32u4", "at90usb162", "at90usb646", "at90usb647", "at90usb1286", "at90usb1287", "atmega32a", "atmega328p", "atmega328", "attiny85", "unknown"] }, "board": { "type": "string", diff --git a/docs/compatible_microcontrollers.md b/docs/compatible_microcontrollers.md index 5e16ab2770..0f5b140de0 100644 --- a/docs/compatible_microcontrollers.md +++ b/docs/compatible_microcontrollers.md @@ -31,6 +31,8 @@ You can also use any ARM chip with USB that [ChibiOS](https://www.chibios.org) s * [STM32F446](https://www.st.com/en/microcontrollers-microprocessors/stm32f446.html) * [STM32G431](https://www.st.com/en/microcontrollers-microprocessors/stm32g4x1.html) * [STM32G474](https://www.st.com/en/microcontrollers-microprocessors/stm32g4x4.html) + * [STM32L433](https://www.st.com/en/microcontrollers-microprocessors/stm32l4x3.html) + * [STM32L443](https://www.st.com/en/microcontrollers-microprocessors/stm32l4x3.html) ### NXP (Kinetis) diff --git a/docs/ja/compatible_microcontrollers.md b/docs/ja/compatible_microcontrollers.md index 69da70f2c3..b675b038d2 100644 --- a/docs/ja/compatible_microcontrollers.md +++ b/docs/ja/compatible_microcontrollers.md @@ -36,6 +36,8 @@ QMK は十分な容量のフラッシュメモリを備えた USB 対応 AVR ま * [STM32F446](https://www.st.com/en/microcontrollers-microprocessors/stm32f446.html) * [STM32G431](https://www.st.com/en/microcontrollers-microprocessors/stm32g4x1.html) * [STM32G474](https://www.st.com/en/microcontrollers-microprocessors/stm32g4x4.html) +* [STM32L433](https://www.st.com/en/microcontrollers-microprocessors/stm32l4x3.html) +* [STM32L443](https://www.st.com/en/microcontrollers-microprocessors/stm32l4x3.html) ### NXP (Kinetis) diff --git a/lib/python/qmk/constants.py b/lib/python/qmk/constants.py index 33adb0a13e..49e5e0eb42 100644 --- a/lib/python/qmk/constants.py +++ b/lib/python/qmk/constants.py @@ -10,7 +10,7 @@ QMK_FIRMWARE = Path.cwd() MAX_KEYBOARD_SUBFOLDERS = 5 # Supported processor types -CHIBIOS_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'MK66F18', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F411', 'STM32F446', 'STM32G431', 'STM32G474' +CHIBIOS_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'MK66F18', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F411', 'STM32F446', 'STM32G431', 'STM32G474', 'STM32L433', 'STM32L443' LUFA_PROCESSORS = 'at90usb162', 'atmega16u2', 'atmega32u2', 'atmega16u4', 'atmega32u4', 'at90usb646', 'at90usb647', 'at90usb1286', 'at90usb1287', None VUSB_PROCESSORS = 'atmega32a', 'atmega328p', 'atmega328', 'attiny85' diff --git a/platforms/chibios/GENERIC_STM32_L433XC/board/board.mk b/platforms/chibios/GENERIC_STM32_L433XC/board/board.mk new file mode 100644 index 0000000000..1250385eb8 --- /dev/null +++ b/platforms/chibios/GENERIC_STM32_L433XC/board/board.mk @@ -0,0 +1,9 @@ +# List of all the board related files. +BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO32_L432KC/board.c + +# Required include directories +BOARDINC = $(CHIBIOS)/os/hal/boards/ST_NUCLEO32_L432KC + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) diff --git a/platforms/chibios/GENERIC_STM32_L433XC/configs/board.h b/platforms/chibios/GENERIC_STM32_L433XC/configs/board.h new file mode 100644 index 0000000000..51f9724f94 --- /dev/null +++ b/platforms/chibios/GENERIC_STM32_L433XC/configs/board.h @@ -0,0 +1,24 @@ +/* Copyright 2018-2021 Harrison Chan (@Xelus) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include_next "board.h" + +#undef STM32L432xx + +// Pretend that we're an L443xx as the ChibiOS definitions for L432/L433 mistakenly don't enable GPIOH, I2C2, or SPI2. +// Until ChibiOS upstream is fixed, this should be kept at L443, as nothing in QMK currently utilises the crypto peripheral on the L443. +#define STM32L443xx diff --git a/platforms/chibios/GENERIC_STM32_L433XC/configs/config.h b/platforms/chibios/GENERIC_STM32_L433XC/configs/config.h new file mode 100644 index 0000000000..c27c61b19a --- /dev/null +++ b/platforms/chibios/GENERIC_STM32_L433XC/configs/config.h @@ -0,0 +1,26 @@ +/* Copyright 2018-2021 Harrison Chan (@Xelus) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* Address for jumping to bootloader on STM32 chips. */ +/* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606. + */ +#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000 + +#define PAL_STM32_OSPEED_HIGHEST PAL_STM32_OSPEED_HIGH + +#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP +# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE +#endif diff --git a/platforms/chibios/GENERIC_STM32_L433XC/configs/mcuconf.h b/platforms/chibios/GENERIC_STM32_L433XC/configs/mcuconf.h new file mode 100644 index 0000000000..948c740f6e --- /dev/null +++ b/platforms/chibios/GENERIC_STM32_L433XC/configs/mcuconf.h @@ -0,0 +1,292 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + http://www.apache.org/licenses/LICENSE-2.0 + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32L4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#ifndef MCUCONF_H +#define MCUCONF_H + +#define STM32L4xx_MCUCONF +#define STM32L443_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_VOS STM32_VOS_RANGE1 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI16_ENABLED TRUE +#define STM32_HSI48_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED FALSE +#define STM32_LSE_ENABLED FALSE +#define STM32_MSIPLL_ENABLED FALSE +#define STM32_MSIRANGE STM32_MSIRANGE_4M +#define STM32_MSISRANGE STM32_MSISRANGE_4M +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSI16 +#define STM32_PLLM_VALUE 1 +#define STM32_PLLN_VALUE 10 +#define STM32_PLLPDIV_VALUE 0 +#define STM32_PLLP_VALUE 7 +#define STM32_PLLQ_VALUE 2 +#define STM32_PLLR_VALUE 2 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV1 +#define STM32_PPRE2 STM32_PPRE2_DIV1 +#define STM32_STOPWUCK STM32_STOPWUCK_MSI +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_MCOPRE STM32_MCOPRE_DIV1 +#define STM32_LSCOSEL STM32_LSCOSEL_NOCLOCK +#define STM32_PLLSAI1N_VALUE 24 +#define STM32_PLLSAI1PDIV_VALUE 0 +#define STM32_PLLSAI1P_VALUE 7 +#define STM32_PLLSAI1Q_VALUE 2 +#define STM32_PLLSAI1R_VALUE 2 + +/* + * Peripherals clock sources. + */ +#define STM32_USART1SEL STM32_USART1SEL_SYSCLK +#define STM32_USART2SEL STM32_USART2SEL_SYSCLK +#define STM32_USART3SEL STM32_USART3SEL_SYSCLK +#define STM32_LPUART1SEL STM32_LPUART1SEL_SYSCLK +#define STM32_I2C1SEL STM32_I2C1SEL_SYSCLK +#define STM32_I2C2SEL STM32_I2C2SEL_SYSCLK +#define STM32_I2C3SEL STM32_I2C3SEL_SYSCLK +#define STM32_LPTIM1SEL STM32_LPTIM1SEL_PCLK1 +#define STM32_LPTIM2SEL STM32_LPTIM2SEL_PCLK1 +#define STM32_SAI1SEL STM32_SAI1SEL_OFF +#define STM32_CLK48SEL STM32_CLK48SEL_HSI48 +#define STM32_ADCSEL STM32_ADCSEL_SYSCLK +#define STM32_SWPMI1SEL STM32_SWPMI1SEL_PCLK1 +#define STM32_RTCSEL STM32_RTCSEL_LSI + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI1635_38_PRIORITY 6 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI21_22_PRIORITY 15 + +#define STM32_IRQ_TIM1_BRK_TIM15_PRIORITY 7 +#define STM32_IRQ_TIM1_UP_TIM16_PRIORITY 7 +#define STM32_IRQ_TIM1_TRGCO_TIM17_PRIORITY 7 +#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#define STM32_IRQ_TIM2_PRIORITY 7 +#define STM32_IRQ_TIM6_PRIORITY 7 +#define STM32_IRQ_TIM7_PRIORITY 7 + +#define STM32_IRQ_USART1_PRIORITY 12 +#define STM32_IRQ_USART2_PRIORITY 12 +#define STM32_IRQ_USART3_PRIORITY 12 +#define STM32_IRQ_LPUART1_PRIORITY 12 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_COMPACT_SAMPLES FALSE +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC12_IRQ_PRIORITY 5 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC123_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_ADC123_PRESC ADC_CCR_PRESC_DIV2 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * DAC driver system settings. + */ +#define STM32_DAC_DUAL_MODE FALSE +#define STM32_DAC_USE_DAC1_CH1 FALSE +#define STM32_DAC_USE_DAC1_CH2 FALSE +#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM15 FALSE +#define STM32_GPT_USE_TIM16 FALSE + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM15 FALSE +#define STM32_ICU_USE_TIM16 FALSE + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM15 FALSE +#define STM32_PWM_USE_TIM16 FALSE + +/* + * RTC driver system settings. + */ +#define STM32_RTC_PRESA_VALUE 32 +#define STM32_RTC_PRESS_VALUE 1024 +#define STM32_RTC_CR_INIT 0 +#define STM32_RTC_TAMPCR_INIT 0 + +/* + * SDMMC drive system settings. + */ +#define STM32_SDC_USE_SDMMC1 FALSE +#define STM32_SDC_SDMMC_UNALIGNED_SUPPORT TRUE +#define STM32_SDC_SDMMC_WRITE_TIMEOUT 1000 +#define STM32_SDC_SDMMC_READ_TIMEOUT 1000 +#define STM32_SDC_SDMMC_CLOCK_DELAY 10 +#define STM32_SDC_SDMMC1_DMA_PRIORITY 3 +#define STM32_SDC_SDMMC1_IRQ_PRIORITY 9 +#define STM32_SDC_SDMMC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_LPUART1 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_LPUART1_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * TRNG driver system settings. + */ +#define STM32_TRNG_USE_RNG1 FALSE + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 6) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +/* + * WSPI driver system settings. + */ +#define STM32_WSPI_USE_QUADSPI1 FALSE +#define STM32_WSPI_QUADSPI1_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) + +#endif /* MCUCONF_H */ diff --git a/quantum/mcu_selection.mk b/quantum/mcu_selection.mk index edf44f5dcc..9268c4522e 100644 --- a/quantum/mcu_selection.mk +++ b/quantum/mcu_selection.mk @@ -435,6 +435,44 @@ ifneq ($(findstring STM32G474, $(MCU)),) UF2_FAMILY ?= STM32G4 endif +ifneq (,$(filter $(MCU),STM32L433 STM32L443)) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32L4xx + + # Linker script to use + # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # or /ld/ + MCU_LDSCRIPT ?= STM32L432xC + + # Startup code to use + # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32l4xx + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_L433XC + + PLATFORM_NAME ?= platform_l432 + + USE_FPU ?= yes + + # Options to pass to dfu-util when flashing + DFU_ARGS ?= -d 0483:DF11 -a 0 -s 0x08000000:leave + DFU_SUFFIX_ARGS ?= -v 0483 -p DF11 + + # UF2 settings + UF2_FAMILY ?= STM32L4 +endif + ifneq (,$(filter $(MCU),at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647 at90usb1286 at90usb1287)) PROTOCOL = LUFA -- cgit v1.2.3 From 5d27c772fdd1740b3d03b5671e1d31dccbf0447e Mon Sep 17 00:00:00 2001 From: Zach White Date: Mon, 3 May 2021 10:09:53 -0700 Subject: Fix comment parsing (#12750) Co-authored-by: Erovia --- keyboards/monstargear/xo87/rgb/config.h | 2 +- lib/python/qmk/c_parse.py | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'lib/python') diff --git a/keyboards/monstargear/xo87/rgb/config.h b/keyboards/monstargear/xo87/rgb/config.h index 0d92c274e4..83eee83492 100644 --- a/keyboards/monstargear/xo87/rgb/config.h +++ b/keyboards/monstargear/xo87/rgb/config.h @@ -30,7 +30,7 @@ #define MATRIX_COLS 16 #define BACKLIGHT_PIN F5 -#define MATRIX_ROW_PINS { E6,E7, E3, B0, B1 ,A2}// +#define MATRIX_ROW_PINS { E6,E7, E3, B0, B1 ,A2} #define MATRIX_COL_PINS { C5,C3,C1,E1,D6,D2,B7,B3,F6,F7,F3,A5,A1,E2,C7,A6 } #define UNUSED_PINS #define DIODE_DIRECTION ROW2COL diff --git a/lib/python/qmk/c_parse.py b/lib/python/qmk/c_parse.py index d4f39c8839..991373d569 100644 --- a/lib/python/qmk/c_parse.py +++ b/lib/python/qmk/c_parse.py @@ -8,7 +8,7 @@ from milc import cli from qmk.comment_remover import comment_remover default_key_entry = {'x': -1, 'y': 0, 'w': 1} -single_comment_regex = re.compile(r' */[/*].*$') +single_comment_regex = re.compile(r'\s+/[/*].*$') multi_comment_regex = re.compile(r'/\*(.|\n)*?\*/', re.MULTILINE) -- cgit v1.2.3 From 7a25dcacffcadf541da5107a35856b66e770bcaf Mon Sep 17 00:00:00 2001 From: Zach White Date: Sat, 8 May 2021 20:56:07 -0700 Subject: New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review Co-authored-by: Ryan * pyformat * clean up and flesh out KNOWN_BOOTLOADERS Co-authored-by: zvecr Co-authored-by: Ryan --- .github/workflows/cli.yml | 2 +- bin/qmk | 2 + docs/cli_commands.md | 48 +++++++ lib/python/qmk/cli/__init__.py | 1 + lib/python/qmk/cli/console.py | 302 +++++++++++++++++++++++++++++++++++++++++ requirements-dev.txt | 2 + util/install/arch.sh | 10 +- util/install/debian.sh | 7 +- util/install/fedora.sh | 7 +- util/install/gentoo.sh | 7 +- util/install/msys2.sh | 9 +- util/udev/50-qmk.rules | 3 + 12 files changed, 378 insertions(+), 22 deletions(-) create mode 100644 lib/python/qmk/cli/console.py (limited to 'lib/python') diff --git a/.github/workflows/cli.yml b/.github/workflows/cli.yml index 28c6bb3679..df727518e5 100644 --- a/.github/workflows/cli.yml +++ b/.github/workflows/cli.yml @@ -23,6 +23,6 @@ jobs: with: submodules: recursive - name: Install dependencies - run: pip3 install -r requirements.txt + run: pip3 install -r requirements-dev.txt - name: Run tests run: bin/qmk pytest diff --git a/bin/qmk b/bin/qmk index a2af2951c9..4b5fd5bbce 100755 --- a/bin/qmk +++ b/bin/qmk @@ -33,6 +33,8 @@ def _check_modules(requirements): # Not every module is importable by its own name. if module['name'] == "pep8-naming": module['import'] = "pep8ext_naming" + elif module['name'] == 'pyusb': + module['import'] = 'usb.core' if not find_spec(module['import']): print('Could not find module %s!' % module['name']) diff --git a/docs/cli_commands.md b/docs/cli_commands.md index 05e9306070..581342093a 100644 --- a/docs/cli_commands.md +++ b/docs/cli_commands.md @@ -107,6 +107,54 @@ This command lets you configure the behavior of QMK. For the full `qmk config` d qmk config [-ro] [config_token1] [config_token2] [...] [config_tokenN] ``` +## `qmk console` + +This command lets you connect to keyboard consoles to get debugging messages. It only works if your keyboard firmware has been compiled with `CONSOLE_ENABLED=yes`. + +**Usage**: + +``` +qmk console [-d :[:]] [-l] [-n] [-t] [-w ] +``` + +**Examples**: + +Connect to all available keyboards and show their console messages: + +``` +qmk console +``` + +List all devices: + +``` +qmk console -l +``` + +Show only messages from clueboard/66/rev3 keyboards: + +``` +qmk console -d C1ED:2370 +``` + +Show only messages from the second clueboard/66/rev3: + +``` +qmk console -d C1ED:2370:2 +``` + +Show timestamps and VID:PID instead of names: + +``` +qmk console -n -t +``` + +Disable bootloader messages: + +``` +qmk console --no-bootloaders +``` + ## `qmk doctor` This command examines your environment and alerts you to potential build or flash problems. It can fix many of them if you want it to. diff --git a/lib/python/qmk/cli/__init__.py b/lib/python/qmk/cli/__init__.py index f7df908119..cfb6e6ea59 100644 --- a/lib/python/qmk/cli/__init__.py +++ b/lib/python/qmk/cli/__init__.py @@ -12,6 +12,7 @@ from . import chibios from . import clean from . import compile from . import config +from . import console from . import docs from . import doctor from . import fileformat diff --git a/lib/python/qmk/cli/console.py b/lib/python/qmk/cli/console.py new file mode 100644 index 0000000000..45ff0c8bee --- /dev/null +++ b/lib/python/qmk/cli/console.py @@ -0,0 +1,302 @@ +"""Acquire debugging information from usb hid devices + +cli implementation of https://www.pjrc.com/teensy/hid_listen.html +""" +from pathlib import Path +from threading import Thread +from time import sleep, strftime + +import hid +import usb.core + +from milc import cli + +LOG_COLOR = { + 'next': 0, + 'colors': [ + '{fg_blue}', + '{fg_cyan}', + '{fg_green}', + '{fg_magenta}', + '{fg_red}', + '{fg_yellow}', + ], +} + +KNOWN_BOOTLOADERS = { + # VID , PID + ('03EB', '2FEF'): 'atmel-dfu: ATmega16U2', + ('03EB', '2FF0'): 'atmel-dfu: ATmega32U2', + ('03EB', '2FF3'): 'atmel-dfu: ATmega16U4', + ('03EB', '2FF4'): 'atmel-dfu: ATmega32U4', + ('03EB', '2FF9'): 'atmel-dfu: AT90USB64', + ('03EB', '2FFA'): 'atmel-dfu: AT90USB162', + ('03EB', '2FFB'): 'atmel-dfu: AT90USB128', + ('03EB', '6124'): 'Microchip SAM-BA', + ('0483', 'DF11'): 'stm32-dfu: STM32 BOOTLOADER', + ('16C0', '05DC'): 'USBasp: USBaspLoader', + ('16C0', '05DF'): 'bootloadHID: HIDBoot', + ('16C0', '0478'): 'halfkay: Teensy Halfkay', + ('1B4F', '9203'): 'caterina: Pro Micro 3.3V', + ('1B4F', '9205'): 'caterina: Pro Micro 5V', + ('1B4F', '9207'): 'caterina: LilyPadUSB', + ('1C11', 'B007'): 'kiibohd: Kiibohd DFU Bootloader', + ('1EAF', '0003'): 'stm32duino: Maple 003', + ('1FFB', '0101'): 'caterina: Polou A-Star 32U4 Bootloader', + ('2341', '0036'): 'caterina: Arduino Leonardo', + ('2341', '0037'): 'caterina: Arduino Micro', + ('239A', '000C'): 'caterina: Adafruit Feather 32U4', + ('239A', '000D'): 'caterina: Adafruit ItsyBitsy 32U4 3v', + ('239A', '000E'): 'caterina: Adafruit ItsyBitsy 32U4 5v', + ('239A', '000E'): 'caterina: Adafruit ItsyBitsy 32U4 5v', + ('2A03', '0036'): 'caterina: Arduino Leonardo', + ('2A03', '0037'): 'caterina: Arduino Micro', + ('314B', '0106'): 'apm32-dfu: APM32 DFU ISP Mode' +} + + +class MonitorDevice(object): + def __init__(self, hid_device, numeric): + self.hid_device = hid_device + self.numeric = numeric + self.device = hid.Device(path=hid_device['path']) + self.current_line = '' + + cli.log.info('Console Connected: %(color)s%(manufacturer_string)s %(product_string)s{style_reset_all} (%(color)s%(vendor_id)04X:%(product_id)04X:%(index)d{style_reset_all})', hid_device) + + def read(self, size, encoding='ascii', timeout=1): + """Read size bytes from the device. + """ + return self.device.read(size, timeout).decode(encoding) + + def read_line(self): + """Read from the device's console until we get a \n. + """ + while '\n' not in self.current_line: + self.current_line += self.read(32).replace('\x00', '') + + lines = self.current_line.split('\n', 1) + self.current_line = lines[1] + + return lines[0] + + def run_forever(self): + while True: + try: + message = {**self.hid_device, 'text': self.read_line()} + identifier = (int2hex(message['vendor_id']), int2hex(message['product_id'])) if self.numeric else (message['manufacturer_string'], message['product_string']) + message['identifier'] = ':'.join(identifier) + message['ts'] = '{style_dim}{fg_green}%s{style_reset_all} ' % (strftime(cli.config.general.datetime_fmt),) if cli.args.timestamp else '' + + cli.echo('%(ts)s%(color)s%(identifier)s:%(index)d{style_reset_all}: %(text)s' % message) + + except hid.HIDException: + break + + +class FindDevices(object): + def __init__(self, vid, pid, index, numeric): + self.vid = vid + self.pid = pid + self.index = index + self.numeric = numeric + + def run_forever(self): + """Process messages from our queue in a loop. + """ + live_devices = {} + live_bootloaders = {} + + while True: + try: + for device in list(live_devices): + if not live_devices[device]['thread'].is_alive(): + cli.log.info('Console Disconnected: %(color)s%(manufacturer_string)s %(product_string)s{style_reset_all} (%(color)s%(vendor_id)04X:%(product_id)04X:%(index)d{style_reset_all})', live_devices[device]) + del live_devices[device] + + for device in self.find_devices(): + if device['path'] not in live_devices: + device['color'] = LOG_COLOR['colors'][LOG_COLOR['next']] + LOG_COLOR['next'] = (LOG_COLOR['next'] + 1) % len(LOG_COLOR['colors']) + live_devices[device['path']] = device + + try: + monitor = MonitorDevice(device, self.numeric) + device['thread'] = Thread(target=monitor.run_forever, daemon=True) + + device['thread'].start() + except Exception as e: + device['e'] = e + device['e_name'] = e.__class__.__name__ + cli.log.error("Could not connect to %(color)s%(manufacturer_string)s %(product_string)s{style_reset_all} (%(color)s:%(vendor_id)04X:%(product_id)04X:%(index)d): %(e_name)s: %(e)s", device) + if cli.config.general.verbose: + cli.log.exception(e) + del live_devices[device['path']] + + if cli.args.bootloaders: + for device in self.find_bootloaders(): + if device.address in live_bootloaders: + live_bootloaders[device.address]._qmk_found = True + else: + name = KNOWN_BOOTLOADERS[(int2hex(device.idVendor), int2hex(device.idProduct))] + cli.log.info('Bootloader Connected: {style_bright}{fg_magenta}%s', name) + device._qmk_found = True + live_bootloaders[device.address] = device + + for device in list(live_bootloaders): + if live_bootloaders[device]._qmk_found: + live_bootloaders[device]._qmk_found = False + else: + name = KNOWN_BOOTLOADERS[(int2hex(live_bootloaders[device].idVendor), int2hex(live_bootloaders[device].idProduct))] + cli.log.info('Bootloader Disconnected: {style_bright}{fg_magenta}%s', name) + del live_bootloaders[device] + + sleep(.1) + + except KeyboardInterrupt: + break + + def is_bootloader(self, hid_device): + """Returns true if the device in question matches a known bootloader vid/pid. + """ + return (int2hex(hid_device.idVendor), int2hex(hid_device.idProduct)) in KNOWN_BOOTLOADERS + + def is_console_hid(self, hid_device): + """Returns true when the usage page indicates it's a teensy-style console. + """ + return hid_device['usage_page'] == 0xFF31 and hid_device['usage'] == 0x0074 + + def is_filtered_device(self, hid_device): + """Returns True if the device should be included in the list of available consoles. + """ + return int2hex(hid_device['vendor_id']) == self.vid and int2hex(hid_device['product_id']) == self.pid + + def find_devices_by_report(self, hid_devices): + """Returns a list of available teensy-style consoles by doing a brute-force search. + + Some versions of linux don't report usage and usage_page. In that case we fallback to reading the report (possibly inaccurately) ourselves. + """ + devices = [] + + for device in hid_devices: + path = device['path'].decode('utf-8') + + if path.startswith('/dev/hidraw'): + number = path[11:] + report = Path(f'/sys/class/hidraw/hidraw{number}/device/report_descriptor') + + if report.exists(): + rp = report.read_bytes() + + if rp[1] == 0x31 and rp[3] == 0x09: + devices.append(device) + + return devices + + def find_bootloaders(self): + """Returns a list of available bootloader devices. + """ + return list(filter(self.is_bootloader, usb.core.find(find_all=True))) + + def find_devices(self): + """Returns a list of available teensy-style consoles. + """ + hid_devices = hid.enumerate() + devices = list(filter(self.is_console_hid, hid_devices)) + + if not devices: + devices = self.find_devices_by_report(hid_devices) + + if self.vid and self.pid: + devices = list(filter(self.is_filtered_device, devices)) + + # Add index numbers + device_index = {} + for device in devices: + id = ':'.join((int2hex(device['vendor_id']), int2hex(device['product_id']))) + + if id not in device_index: + device_index[id] = 0 + + device_index[id] += 1 + device['index'] = device_index[id] + + return devices + + +def int2hex(number): + """Returns a string representation of the number as hex. + """ + return "%04X" % number + + +def list_devices(device_finder): + """Show the user a nicely formatted list of devices. + """ + devices = device_finder.find_devices() + + if devices: + cli.log.info('Available devices:') + for dev in devices: + color = LOG_COLOR['colors'][LOG_COLOR['next']] + LOG_COLOR['next'] = (LOG_COLOR['next'] + 1) % len(LOG_COLOR['colors']) + cli.log.info("\t%s%s:%s:%d{style_reset_all}\t%s %s", color, int2hex(dev['vendor_id']), int2hex(dev['product_id']), dev['index'], dev['manufacturer_string'], dev['product_string']) + + if cli.args.bootloaders: + bootloaders = device_finder.find_bootloaders() + + if bootloaders: + cli.log.info('Available Bootloaders:') + + for dev in bootloaders: + cli.log.info("\t%s:%s\t%s", int2hex(dev.idVendor), int2hex(dev.idProduct), KNOWN_BOOTLOADERS[(int2hex(dev.idVendor), int2hex(dev.idProduct))]) + + +@cli.argument('--bootloaders', arg_only=True, default=True, action='store_boolean', help='displaying bootloaders.') +@cli.argument('-d', '--device', help='Device to select - uses format :[:].') +@cli.argument('-l', '--list', arg_only=True, action='store_true', help='List available hid_listen devices.') +@cli.argument('-n', '--numeric', arg_only=True, action='store_true', help='Show VID/PID instead of names.') +@cli.argument('-t', '--timestamp', arg_only=True, action='store_true', help='Print the timestamp for received messages as well.') +@cli.argument('-w', '--wait', type=int, default=1, help="How many seconds to wait between checks (Default: 1)") +@cli.subcommand('Acquire debugging information from usb hid devices.', hidden=False if cli.config.user.developer else True) +def console(cli): + """Acquire debugging information from usb hid devices + """ + vid = None + pid = None + index = 1 + + if cli.config.console.device: + device = cli.config.console.device.split(':') + + if len(device) == 2: + vid, pid = device + + elif len(device) == 3: + vid, pid, index = device + + if not index.isdigit(): + cli.log.error('Device index must be a number! Got "%s" instead.', index) + exit(1) + + index = int(index) + + if index < 1: + cli.log.error('Device index must be greater than 0! Got %s', index) + exit(1) + + else: + cli.log.error('Invalid format for device, expected ":[:]" but got "%s".', cli.config.console.device) + cli.print_help() + exit(1) + + vid = vid.upper() + pid = pid.upper() + + device_finder = FindDevices(vid, pid, index, cli.args.numeric) + + if cli.args.list: + return list_devices(device_finder) + + print('Looking for devices...', flush=True) + device_finder.run_forever() diff --git a/requirements-dev.txt b/requirements-dev.txt index 1db3b6d733..12d570e70c 100644 --- a/requirements-dev.txt +++ b/requirements-dev.txt @@ -4,5 +4,7 @@ # Python development requirements nose2 flake8 +hid pep8-naming +pyusb yapf diff --git a/util/install/arch.sh b/util/install/arch.sh index 7442e2f136..eac4ad64ef 100755 --- a/util/install/arch.sh +++ b/util/install/arch.sh @@ -4,13 +4,13 @@ _qmk_install() { echo "Installing dependencies" sudo pacman --needed --noconfirm -S \ - base-devel clang diffutils gcc git unzip wget zip \ - python-pip \ - avr-binutils \ - arm-none-eabi-binutils arm-none-eabi-gcc arm-none-eabi-newlib \ - avrdude dfu-programmer dfu-util + base-devel clang diffutils gcc git unzip wget zip python-pip \ + avr-binutils arm-none-eabi-binutils arm-none-eabi-gcc \ + arm-none-eabi-newlib avrdude dfu-programmer dfu-util sudo pacman --needed --noconfirm -U https://archive.archlinux.org/packages/a/avr-gcc/avr-gcc-8.3.0-1-x86_64.pkg.tar.xz sudo pacman --needed --noconfirm -S avr-libc # Must be installed after the above, or it will bring in the latest avr-gcc instead + sudo pacman --needed --noconfirm -S hidapi # This will fail if the community repo isn't enabled + python3 -m pip install --user -r $QMK_FIRMWARE_DIR/requirements.txt } diff --git a/util/install/debian.sh b/util/install/debian.sh index 0ae9764a33..ef87c41b51 100755 --- a/util/install/debian.sh +++ b/util/install/debian.sh @@ -13,10 +13,9 @@ _qmk_install() { sudo apt-get -yq install \ build-essential clang-format diffutils gcc git unzip wget zip \ - python3-pip \ - binutils-avr gcc-avr avr-libc \ - binutils-arm-none-eabi gcc-arm-none-eabi libnewlib-arm-none-eabi \ - avrdude dfu-programmer dfu-util teensy-loader-cli libusb-dev + python3-pip binutils-avr gcc-avr avr-libc binutils-arm-none-eabi \ + gcc-arm-none-eabi libnewlib-arm-none-eabi avrdude dfu-programmer \ + dfu-util teensy-loader-cli libhidapi-hidraw0 python3 -m pip install --user -r $QMK_FIRMWARE_DIR/requirements.txt } diff --git a/util/install/fedora.sh b/util/install/fedora.sh index 44b71b98bf..10fc7c8ad8 100755 --- a/util/install/fedora.sh +++ b/util/install/fedora.sh @@ -5,11 +5,10 @@ _qmk_install() { # TODO: Check whether devel/headers packages are really needed sudo dnf -y install \ - clang diffutils git gcc glibc-headers kernel-devel kernel-headers make unzip wget zip \ - python3 \ - avr-binutils avr-gcc avr-libc \ + clang diffutils git gcc glibc-headers kernel-devel kernel-headers \ + make unzip wget zip python3 avr-binutils avr-gcc avr-libc \ arm-none-eabi-binutils-cs arm-none-eabi-gcc-cs arm-none-eabi-newlib \ - avrdude dfu-programmer dfu-util libusb-devel + avrdude dfu-programmer dfu-util hidapi python3 -m pip install --user -r $QMK_FIRMWARE_DIR/requirements.txt } diff --git a/util/install/gentoo.sh b/util/install/gentoo.sh index 97eb5df07f..604d07bf84 100755 --- a/util/install/gentoo.sh +++ b/util/install/gentoo.sh @@ -22,9 +22,10 @@ _qmk_install() { echo "sys-devel/gcc multilib" | sudo tee --append /etc/portage/package.use/qmkfirmware >/dev/null sudo emerge -auN sys-devel/gcc sudo emerge -au --noreplace \ - app-arch/unzip app-arch/zip net-misc/wget sys-devel/clang sys-devel/crossdev \ - \>=dev-lang/python-3.7 \ - dev-embedded/avrdude dev-embedded/dfu-programmer app-mobilephone/dfu-util + app-arch/unzip app-arch/zip net-misc/wget sys-devel/clang \ + sys-devel/crossdev \>=dev-lang/python-3.7 dev-embedded/avrdude \ + dev-embedded/dfu-programmer app-mobilephone/dfu-util sys-apps/hwloc \ + dev-libs/hidapi sudo crossdev -s4 --stable --g \<9 --portage --verbose --target avr sudo crossdev -s4 --stable --g \<9 --portage --verbose --target arm-none-eabi diff --git a/util/install/msys2.sh b/util/install/msys2.sh index c8598a60fa..9b8343aed0 100755 --- a/util/install/msys2.sh +++ b/util/install/msys2.sh @@ -9,11 +9,10 @@ _qmk_install() { pacman --needed --noconfirm --disable-download-timeout -S pactoys-git pacboy sync --needed --noconfirm --disable-download-timeout \ - base-devel: toolchain:x clang:x git: unzip: \ - python3-pip:x \ - avr-binutils:x avr-gcc:x avr-libc:x \ - arm-none-eabi-binutils:x arm-none-eabi-gcc:x arm-none-eabi-newlib:x \ - avrdude:x bootloadhid:x dfu-programmer:x dfu-util:x teensy-loader-cli:x + base-devel: toolchain:x clang:x git: unzip: python3-pip:x \ + avr-binutils:x avr-gcc:x avr-libc:x arm-none-eabi-binutils:x \ + arm-none-eabi-gcc:x arm-none-eabi-newlib:x avrdude:x bootloadhid:x \ + dfu-programmer:x dfu-util:x teensy-loader-cli:x hidapi:x _qmk_install_drivers diff --git a/util/udev/50-qmk.rules b/util/udev/50-qmk.rules index acaa7dcc58..679fe4ced3 100644 --- a/util/udev/50-qmk.rules +++ b/util/udev/50-qmk.rules @@ -60,3 +60,6 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="239a", ATTRS{idProduct}=="000e", TAG+="uacc SUBSYSTEMS=="usb", ATTRS{idVendor}=="2a03", ATTRS{idProduct}=="0036", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" ### Micro SUBSYSTEMS=="usb", ATTRS{idVendor}=="2a03", ATTRS{idProduct}=="0037", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" + +# hid_listen +KERNEL=="hidraw*", MODE="0660", GROUP="plugdev", TAG+="uaccess", TAG+="udev-acl" -- cgit v1.2.3 From 6da60d4a5d75d88da36385c5e14ff00c5055214d Mon Sep 17 00:00:00 2001 From: Zach White Date: Wed, 12 May 2021 09:40:58 -0700 Subject: Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) --- lib/python/qmk/cli/__init__.py | 72 ++++++++++++++++++++++++------------------ 1 file changed, 42 insertions(+), 30 deletions(-) (limited to 'lib/python') diff --git a/lib/python/qmk/cli/__init__.py b/lib/python/qmk/cli/__init__.py index 1fe0657206..3face93a53 100644 --- a/lib/python/qmk/cli/__init__.py +++ b/lib/python/qmk/cli/__init__.py @@ -13,6 +13,21 @@ from milc import cli, __VERSION__ from milc.questions import yesno +import_names = { + # A mapping of package name to importable name + 'pep8-naming': 'pep8ext_naming', + 'pyusb': 'usb.core', +} + +safe_commands = [ + # A list of subcommands we always run, even when the module imports fail + 'clone', + 'config', + 'env', + 'setup', +] + + def _run_cmd(*command): """Run a command in a subshell. """ @@ -50,10 +65,8 @@ def _find_broken_requirements(requirements): module_import = module_name.replace('-', '_') # Not every module is importable by its own name. - if module_name == "pep8-naming": - module_import = "pep8ext_naming" - elif module_name == 'pyusb': - module_import = 'usb.core' + if module_name in import_names: + module_import = import_names[module_name] if not find_spec(module_import): broken_modules.append(module_name) @@ -109,32 +122,31 @@ if int(milc_version[0]) < 2 and int(milc_version[1]) < 3: # Check to make sure we have all our dependencies msg_install = 'Please run `python3 -m pip install -r %s` to install required python dependencies.' - -if _broken_module_imports('requirements.txt'): - if yesno('Would you like to install the required Python modules?'): - _run_cmd(sys.executable, '-m', 'pip', 'install', '-r', 'requirements.txt') - else: - print() - print(msg_install % (str(Path('requirements.txt').resolve()),)) - print() - exit(1) - -if cli.config.user.developer: - args = sys.argv[1:] - while args and args[0][0] == '-': - del args[0] - if not args or args[0] != 'config': - if _broken_module_imports('requirements-dev.txt'): - if yesno('Would you like to install the required developer Python modules?'): - _run_cmd(sys.executable, '-m', 'pip', 'install', '-r', 'requirements-dev.txt') - elif yesno('Would you like to disable developer mode?'): - _run_cmd(sys.argv[0], 'config', 'user.developer=None') - else: - print() - print(msg_install % (str(Path('requirements-dev.txt').resolve()),)) - print('You can also turn off developer mode: qmk config user.developer=None') - print() - exit(1) +args = sys.argv[1:] +while args and args[0][0] == '-': + del args[0] + +if not args or args[0] not in safe_commands: + if _broken_module_imports('requirements.txt'): + if yesno('Would you like to install the required Python modules?'): + _run_cmd(sys.executable, '-m', 'pip', 'install', '-r', 'requirements.txt') + else: + print() + print(msg_install % (str(Path('requirements.txt').resolve()),)) + print() + exit(1) + + if cli.config.user.developer and _broken_module_imports('requirements-dev.txt'): + if yesno('Would you like to install the required developer Python modules?'): + _run_cmd(sys.executable, '-m', 'pip', 'install', '-r', 'requirements-dev.txt') + elif yesno('Would you like to disable developer mode?'): + _run_cmd(sys.argv[0], 'config', 'user.developer=None') + else: + print() + print(msg_install % (str(Path('requirements-dev.txt').resolve()),)) + print('You can also turn off developer mode: qmk config user.developer=None') + print() + exit(1) # Import our subcommands from . import c2json # noqa -- cgit v1.2.3 From de5c30a9bab0b1ebf97578931fad4ffe2ee00197 Mon Sep 17 00:00:00 2001 From: Zach White Date: Sun, 16 May 2021 11:06:57 -0700 Subject: Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test --- lib/python/qmk/cli/__init__.py | 3 +- lib/python/qmk/cli/config.py | 116 ------------------------------ lib/python/qmk/tests/test_cli_commands.py | 6 -- 3 files changed, 1 insertion(+), 124 deletions(-) delete mode 100644 lib/python/qmk/cli/config.py (limited to 'lib/python') diff --git a/lib/python/qmk/cli/__init__.py b/lib/python/qmk/cli/__init__.py index 3face93a53..02b721f342 100644 --- a/lib/python/qmk/cli/__init__.py +++ b/lib/python/qmk/cli/__init__.py @@ -12,7 +12,6 @@ from subprocess import run from milc import cli, __VERSION__ from milc.questions import yesno - import_names = { # A mapping of package name to importable name 'pep8-naming': 'pep8ext_naming', @@ -154,7 +153,7 @@ from . import cformat # noqa from . import chibios # noqa from . import clean # noqa from . import compile # noqa -from . import config # noqa +from milc.subcommand import config # noqa from . import console # noqa from . import docs # noqa from . import doctor # noqa diff --git a/lib/python/qmk/cli/config.py b/lib/python/qmk/cli/config.py deleted file mode 100644 index e17d8bb9ba..0000000000 --- a/lib/python/qmk/cli/config.py +++ /dev/null @@ -1,116 +0,0 @@ -"""Read and write configuration settings -""" -from milc import cli - - -def print_config(section, key): - """Print a single config setting to stdout. - """ - cli.echo('%s.%s{fg_cyan}={fg_reset}%s', section, key, cli.config[section][key]) - - -def show_config(): - """Print the current configuration to stdout. - """ - for section in cli.config: - for key in cli.config[section]: - print_config(section, key) - - -def parse_config_token(config_token): - """Split a user-supplied configuration-token into its components. - """ - section = option = value = None - - if '=' in config_token and '.' not in config_token: - cli.log.error('Invalid configuration token, the key must be of the form
.